Your shopping cart is empty!
The new VersaDrive HD impact wrench adapter has been developed to work with the latest genera..
£71.94 Ex Tax: £59.95
High quality 1/4in impact driver adapter for use with all standard 1/4in drive impact wrenche..
£26.82 Ex Tax: £22.35
- HSS drill bits are hard and much more resistant to heat than high-carbon steel.
- Used to drill metal, hardwood and most other materialsat greater cutting speeds than carbon steel bits.
£0.00 Ex Tax: £0.00
- HSS-XE twist drill bits with integrated magnet weldon shank for simple and accurate drilling in steel and fast tool changing. Removes the need for using tool chuck in a magnet drill.
- Where drilling smaller holes or tapping size holes has been a long and time consuming job in the past, fitting the Silvermax Magnet Twist Drills into a magnet drill can suddenly make the job far quicker and safer than struggling with a pistol drill and jobber drills.
£0.00 Ex Tax: £0.00
- Masonry drill bit for drilling in bricks and masonry.
- Parallel round shank.
£0.00 Ex Tax: £0.00
- SDS plus auger bits.
- Can be used in both electric power drills and hand braces.
- With a single cutting edge for easy regrinding, though the need for regrinding is reduced as it is made from hardened tool steel for a longer cutting life.
- The threaded tip moderates a self-feed.
£0.00 Ex Tax: £0.00
- SDS-plus high performance drill bit with four tungsten carbide cutting edges.
- Suitable for drilling in concrete, natural stone and masonry.
£0.00 Ex Tax: £0.00
- CarbideMax Ultra cutters are specifically designed for the toughest broaching jobs on the planet, including Hardox steel.
- Succesful results machining these materials requires the right combination of equipment including high torque/slow speed, geared Magnet Drill, like the HMT MAX100 Magnet Drill and plently of BioCut Blue lubricant.
- Patience and experience is essential to get the best results with these materials including allowing the cutter to cool during the cut to avoid overheating and damaging the cutting tips.
£0.00 Ex Tax: £0.00
- The CarbideMax Ultra coating is specifically designed for the toughest countersinking jobs on the planet, including Hardox steel
- Succesful results machining these materials requires the right combination of equipment including high torque/slow speed, geared Magnet Drill, like the HMT MAX100 Magnet Drill and BioCut Blue lubricant. Patience and experience is essential to get the best results with these materials including allowing the cutter to cool during the cut to avoid overheating and damaging the cutting tips.
- The MultiSink is a worldwide unique new Combination Countersink Tool designed and developed by HMT for use with Magnetic Drills, allowing the user to combine the tool with the VersaDrive product range to Broach & Countersink, Drill & Countersink, Tap & Countersink or even Drill, Tap & Countersink in one operation - providing huge time-saving benefits.
£0.00 Ex Tax: £0.00
- SDS + masonry drill bits.
- Used for drilling into hard materials with minimal effort.
- Ideal for use in brick and concrete.
£0.00 Ex Tax: £0.00
- Fast efficient countersinking & deburring.
- 90 Degree point angle for Countersunk Bolt Heads.
- Safer use with minimal kickback; specially hardened for impact wrench use.
- High-Grade Tool Steel with ground flutes for high accuracy & long life.
- GoldMax low friction Titanium Coating to stop heat burn out.
- High Strength, Non-slip shank design.
- Can be used with an impact wrench up to 16.5mm diameter.
£0.00 Ex Tax: £0.00
- The best long-life twist drill bits for metal.All VersaDrive Drill Bits can be used in any standard 1/2in drill chuck for cordless or pistol drill use, or adapted for use in a Magnet Drill or Impact Wrench.
- Fast drilling with minimal kickback; dual hardened for impact wrench use up to 10mm.
- Precision Ground Flutes; with deep web design for easy chip clearance.
- 135 degree split point for easy starting and high accuracy.
- 8% Cobalt for long life and endurance in structural steel and hard metals. GoldMax Low Friction Titanium Coating to stop heat burn out.
- High Strength, Non-Slip Shank Design.
£0.00 Ex Tax: £0.00
- The best long-life twist drill bits for metal.All VersaDrive Drill Bits can be used in any standard 1/2in drill chuck for cordless or pistol drill use, or adapted for use in a Magnet Drill or Impact Wrench.
- Fast drilling with minimal kickback; dual hardened for impact wrench use up to 10mm.
- Precision Ground Flutes; with deep web design for easy chip clearance.
- 135 Split Point for easy starting and high accuracy.
- 8% Cobalt for long life and endurance in structural steel and hard metals. GoldMax Low Friction Titanium Coating to stop heat burn out.
- High Strength, Non-Slip Shank Design.
£0.00 Ex Tax: £0.00
- The DrillSink is the latest innovative addition to the Versadrive product range.
- Saves metalworkers time & increasing hole accuracy by drilling and then countersink fixing holes ion one operation.
- Ensures smooth countersinking and perfect accuracy every time.
- Prevents the chattering and reduced tool life commonly experienced with standard countersinks.
£0.00 Ex Tax: £0.00
- VersaDrive Heavy Duty Impacta-DrillTaps are primarily designed to be adapted for use with a reversible Magnet Drill to drill and tap heavy plate in 1 easy operation.
- However, they can also be adapted for use with an impact wrench to enlarge and tap existing holes. Due the high rotational torque generated by larger thread sizes, Heavy Duty Impacta-DrillTaps are not reccomended for use in a standard drill chuck.
- Ground Flute Twist Drill Creates the perfect Tapping Hole.
- Safer Tapping with Minimal Kickback; specially hardened for impact wrench use.
- High Grade Tool Steel with ground flutes for high accuracy & long life.
- GoldMax low friction Titanium Coating to stop heat burn out.
- High Strength, Non slip shank design.
£0.00 Ex Tax: £0.00
- High-quality impact rated adapters.
- Quick release action for ultimate convenience. Supplied with retention pin and ring.
£0.00 Ex Tax: £0.00
- Fast Tapping with Minimal Kickback; Specially hardened for Impact Wrench use.
- Chipbreaker action for Automatic chip clearance when Impact Tapping.
- Unique Dual-Point Starting Angle for easy alignment and fast cut.
- High Grade Tool Steel with Ground Flutes for high accuracy & long life.
- GoldMax low-friction Titanium coating to stop heat burn out.
- High Strength, Non-slip Shank.
£0.00 Ex Tax: £0.00
- Fast Tapping with Minimal Kickback; Specially hardened for Impact Wrench use.
- Spiral Flute Design for forward swarf ejection when tapping thick materials.
- High Grade Tool Steel with Ground Flutes for high accuracy & long life.
- GoldMax low-friction Titanium coating to stop heat burn out.
- High Strength, Non-slip Shank Design For Tapping thick materials or in applications requiring extra length to access the hole.
£0.00 Ex Tax: £0.00
- Fast Tapping with Minimal Kickback; Specially hardened for Impact Wrench use.
- Chipbreaker action for Automatic chip clearance when Impact Tapping.
- Unique Dual-Point Starting Angle for easy alignment and fast cut.
- High Grade Tool Steel with Ground Flutes for high accuracy & long life.
- GoldMax low-friction Titanium coating to stop heat burn out.
- High Strength, Non-slip Shank.
£0.00 Ex Tax: £0.00
- Fast Tapping with Minimal Kickback; Specially hardened for Impact Wrench use.
- Chipbreaker action for Automatic chip clearance when Impact Tapping.
- Unique Dual-Point Starting Angle for easy alignment and fast cut.
- High Grade Tool Steel with Ground Flutes for high accuracy & long life.
- GoldMax low-friction Titanium coating to stop heat burn out.
- High Strength, Non-slip Shank.
£0.00 Ex Tax: £0.00
- 15x faster than hand tapping.
- VersaDrive ImpactaTaps perform best when adapted for use with an Impact wrench for Tapping through holes.
- However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench.
- Fast Tapping with Minimal Kickback; Specially hardened for Impact Wrench use.
- Chipbreaker action for Automatic chip clearance when Impact Tapping.
- Unique Dual-Point Starting Angle for easy alignment and fast cut.
- High Grade Tool Steel with Ground Flutes for high accuracy & long life.
- GoldMax low-friction Titanium coating to stop heat burn out.
- High Strength, Non-slip Shank Design.
£0.00 Ex Tax: £0.00
- Fast Tapping with Minimal Kickback; Specially hardened for Impact Wrench use.
- Chipbreaker action for Automatic chip clearance when Impact Tapping.
- Unique Dual-Point Starting Angle for easy alignment and fast cut.
- High Grade Tool Steel with Ground Flutes for high accuracy & long life.
- GoldMax low-friction Titanium coating to stop heat burn out.
- High Strength, Non-slip Shank.
£0.00 Ex Tax: £0.00
- 15x faster than hand tapping.
- VersaDrive ImpactaTaps for Galvanised Bolts have an oversized thread to compensate for the increased thickness of coating found on galvanised steel fabrications or galvanised fixings.
- VersaDrive ImpactaTaps perform best when adapted for use with an Impact wrench for through holes. However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench.
- Fast Tapping with Minimal Kickback; Specially hardened for Impact Wrench use.
- Chipbreaker action for Automatic chip clearance when Impact Tapping.
- Unique Dual-Point Starting Angle for easy alignment and fast cut.
- High Grade Tool Steel with Ground Flutes for high accuracy & long life.
- High Strength, Non-slip Shank Design.
- Galv Taps have an oversized thread to compensate for the increased thickness of coating found on galvanized steel fabrications or galvanised fixings.
£0.00 Ex Tax: £0.00
- Precision 6-Flute design for a smooth cut on structural steel.
- Safer reaming with minimal kickback; specially hardened for impact wrench use.
- High-Grade Tool Steel with ground flutes for high accuracy & long life.
- GoldMax low friction Titanium Coating to stop heat burn out.
- High Strength, Non-slip shank design.
£0.00 Ex Tax: £0.00
- Precision 6-Flute design for a smooth cut on structural steel.
- Safer reaming with minimal kickback; specially hardened for impact wrench use.
- High-Grade Tool Steel with ground flutes for high accuracy & long life.
- GoldMax low friction Titanium Coating to stop heat burn out.
- High Strength, Non-slip shank design.
£0.00 Ex Tax: £0.00
- Fits into any standard Morse Taper 2 or Morse Taper 3 Drill Sleeve.
- Ideal for use with Radial arm pillar drills or Morse Taper Magnet Drills.
- Hard wearing Stainless Steel grub screws located at 3 points for ultimate tool holding accuracy.
£0.00 Ex Tax: £0.00
- Ground Flute Twist Drill Creates the perfect Tapping Hole.
- Safer Tapping with Minimal Kickback; specially hardened for impact wrench use.
- High Grade Tool Steel with ground flutes for high accuracy & long life.
- GoldMax low friction Titanium Coating to stop heat burn out.
- High Strength, Non slip shank design.
£0.00 Ex Tax: £0.00
- Upto 15x faster than hand tapping.
- Specially Hardened, High Grade Tool Steel with Ground Flutes for high accuracy & long life.
- GoldMax low-friction Titanium coating to stop heat burn out.
- High Strength, Non-slip Shank Design.
£0.00 Ex Tax: £0.00
- 15x faster than hand tappng.
- Specially Hardened, High Grade Tool Steel with Ground Flutes for high accuracy & long life.
- GoldMax low-friction Titanium coating to stop heat burn out.
- High Strength, Non-slip Shank Design
£0.00 Ex Tax: £0.00
- Fast, smooth drilling with miminal kickback; Specially hardened for impact wrench use.
- Precision ground flutes with deep web design for easy chip clearance.
- 135 degree SPLIT point angle for easy starting and high accuracy
- 8% Cobalt for long life and endurance in structural steel and hard metals.
- Goldmax low-friction titanium coating to stop heat burn-out.
- High strength, non-slip shank design.
£0.00 Ex Tax: £0.00
- Use in any standard drill chuck.
- Use with the VersaDrive Magnet Drill adapter to convert to a broaching cutter.
- Use with the MultiSink tool to broach and Countersink in one operation.
- Massive 70mm reach with 55mm depth of cut, ideal for drilling channel, box section and thick steel.
- Premium quality Tungsten Carbide teeth for ultimate tool life in structural grade steels as well as Stainless Steel, Cast Iron, plastic, composites etc.
- Perfect for drilling heavy steel in locations that arent suitable for a mag drill.
- High strength, non-slip shank design.
- Use in any standard drill chuck or with a magnet drill adapter.
£0.00 Ex Tax: £0.00
The TCT MultiSink is a worldwide unique new Combination Countersink Tool designed and develop..
£24.12 Ex Tax: £20.10
The VersaDrive SDS+ adapter is a unique accessory that enables the whole range of VersaDrive ..
£22.38 Ex Tax: £18.65
- Diamond bits have a significantly extended service life and prevent damaging cam-out.
- Ideal for use with screws into high resistant materials such as hardwoods and ABS plastic and self-tapping screws.
- Use with all combi and drill drivers.
- Use with Wera BiTorsion Rapidaptor bit holder for ultimate service life
£0.00 Ex Tax: £0.00
- Extra Hard bits are a hard wearing, great value bit, with longer service life.
- Ideal for driving into timber and general construction materials.
- 1/4in hex drive.
£0.00 Ex Tax: £0.00
- Designed for use with all heavy-duty impact machines and can be used on any machine.
- The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry.
- Particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance.
£0.00 Ex Tax: £0.00
- Powerful ring magnet which holds up to 8in (200mm) screws, for easy use.
- Ideal for single hand or overhead use, or in tight spaces.
- Spring steel body for anti clogging in dusty environments.
- Easy press in auto bit lock and one hand bit change.
- For all drill drivers.
£0.00 Ex Tax: £0.00
- Woodspade drill bits are also known as flat bits.
- Easy to use for fast, clean hols through studs, joists and other soft woods.
- Fit most standard quick-change chucks.
£0.00 Ex Tax: £0.00