CarbideMax 55 TCT Rai Tungsten Carbide Broaching cutters are specially designed for drilling railtrack material.
Specially machined cutting geometry offers superior performance over against HSS cutters and other similar alternatives with in excess of 100 holes in UIC 60 Rail achievable.
The RailMax 55 Series will broach up to 50mm thickness of steel.
Suitable for Cembre, Rotabroach and other similar rail track drilling machines.
CarbideMax 30 TCT Rail Tungsten Carbide Broaching cutters are specially designed for drilling railtrack material.
Specially machined cutting geometry offers superior performance over against HSS cutters and other similar alternatives with in excess of 100 holes in UIC 60 Rail achievable.
The RailMax 30 Series will broach up to 30mm thickness of steel.
Suitable for Cembre, Rotabroach and other similar rail track drilling machines.
With the requirement for ultra large diameter broaching fast increasing, HMT have launched the CarbideMax-XL range of Tungsten Carbide Tipped cutters from 60mm right up to 200mm diameter with 110mm cutting depth as standard.
These high quality TCT cutters have a reinforced 32mm diameter shank to withstand the high levels of torque generated.
Large diameter broaching has its own unique challenges relating to correct machine size, RPM, lubricant and feed rates.
Hire machines for large diameter broaching available from stock.
With the requirement for ultra large diameter broaching fast increasing, HMT have launched the CarbideMax-XL range of Tungsten Carbide Tipped cutters from 65 right up to 150mm diameter with 55mm cutting depth as standard.
These high quality TCT cutters have a reinforced 32mm diameter shank to withstand the high levels of torque generated.
Large diameter broaching has its own unique challenges relating to correct machine size, RPM, lubricant and feed rates.
Contact our sales team to discuss your particular application.
CarbideMax Ultra cutters are specifically designed for the toughest broaching jobs on the planet, including Hardox steel.
Succesful results machining these materials requires the right combination of equipment including high torque/slow speed, geared Magnet Drill, like the HMT MAX100 Magnet Drill and plently of BioCut Blue lubricant.
Patience and experience is essential to get the best results with these materials including allowing the cutter to cool during the cut to avoid overheating and damaging the cutting tips.
The best long-life twist drill bits for metal.All VersaDrive Drill Bits can be used in any standard 1/2in drill chuck for cordless or pistol drill use, or adapted for use in a Magnet Drill or Impact Wrench.
Fast drilling with minimal kickback; dual hardened for impact wrench use up to 10mm.
Precision Ground Flutes; with deep web design for easy chip clearance.
135 degree split point for easy starting and high accuracy.
8% Cobalt for long life and endurance in structural steel and hard metals. GoldMax Low Friction Titanium Coating to stop heat burn out.