Quick Add To Cart


Enter Item Number:

x

Chemical Resin & Anchors

Chemical Resin & Anchors
Show:
Sort By:
  • A range of chemical anchor guns suitable for most resins.
  • With the exception of the foil pack gun, all applicators are suitable for 380ml resin cartridges.
£9.80 Ex Tax: £8.17
  • A 3;1 pure Epoxy resin with high load capacities
  • The Epoxy Resin is a 2 Part, 3:1 ratio, injection system suitable for use in concrete, solid brick and most natural stone.
  • When used with Grade 8.8 Studs or Stainless Steel grade A4/70 studs it provides a very high strength anchorage suitable for use in dry and wet conditions.
  • It is also suitable for use with rebar for use as starter bars and concrete strengthening
£10.54 Ex Tax: £8.78
  • Polyester 300 styrene free resin is a general purpose resinsuitable for brickwork, most natural stone and brickwork.
  • It can be used in dry and wet holes.
  • The polyester styrene free 2 part injection resin is suitable for use in solid concrete, solid brickwork and natural stone as well as hollow materials using a suitable sleeve.
  • It can be used for installing threaded studs, rebar or internal threaded sockets.
£5.96 Ex Tax: £4.97
  • Polyester resin is a general purpose resin suitable for brickwork, most natural stone and concrete.
  • The Polyester 2 Part injection resin is suitable for use in solid concrete, solid brickwork and natural stone as well as hollow materials using a suitable sleeve.
  • It can be used for installing threaded studs, rebar or internal threaded sockets.
£6.29 Ex Tax: £5.24
  • The Polyester Styrene Free 2 Part injection resin is suitable for use in solid concrete, solid brickwork and natural stone as well as hollow materials using a suitable sleeve.
  • It can be used for installing threaded studs, rebar or internal threaded sockets.
Options Available £6.61Options Available £8.62 Ex Tax: £5.51 / £7.18
  • Pure Vinylester resin is a high strength resin suitable for use in concrete, brickwork and most natural stone. it can be used in dry, damp and flooded holes.
  • Approved for use in contact with potable water.
£9.40 Ex Tax: £7.83
  • A fast cure or winter grade injection resin which cures down to -10 degrees centigrade.
  • The Vinylester 2 Part injection resin is suitable for use in solid concrete, solid brickwork and natural stone as well as hollow materials using a suitable sleeve.
  • It can be used for installing threaded studs, rebar or internal threaded sockets.
£9.40 Ex Tax: £7.83
  • Epoxy Acrylate is suitable for use in concrete, brickwork and most natural stone.
  • It can be used in dry, wet and flooded holes.
  • The Epoxy Acrylate 2 part injection resin is suitable for use in solid concrete, solid brickwork and natural stone as well as hollow materials using a suitable sleeve.
  • It can be used for installing threaded studs, rebar or internal threaded sockets.
£9.14 Ex Tax: £7.62
  • Suitable for use in concrete, brickwork and stone.
  • Fast curing two-part chemical anchoring.
  • Suitable for fixing wall ties, starter bars, studs & bolts.
  • Suitable for close edge fixings.
  • Chemically resistant, waterproof & vibration proof. 
£5.99 Ex Tax: £4.99
  • High Tensile Grade 8.8 zinc and yellow passivated to 5 microns studs for use with J-Fix Glass Spin In Capsules or J-Fix Injection Resin Systems, supplied complete with nut and washer.
  • The studs have external hexagon drive units with one drive unit in each box.
  • Each stud has a depth mark to indicate correct setting depth and a chisel point to facilitate appropriate mixing when using glass spin in capsules.
Options Available £4.66Options Available £24.90 Ex Tax: £3.88 / £20.75
  • Hot dipped galvanised to a minimum of 42 microns, the J-Fix galvanised studs are for use with J-Fix glass spin In capsules or J-Fix injection resin systems, supplied complete with nut and washer.
  • The studs have external hexagon drive units with one drive unit in each box.
  • Each stud has a depth mark to indicate correct setting depth and a chisel point to facilitate appropriate mixing when using glass spin in capsules.
Options Available £8.74Options Available £27.68 Ex Tax: £7.28 / £23.07
  • Grade A4/316 Stainless Steel Studs for use with J-Fix Glass Spin In Capsules or J-Fix Injection Resin Systems, supplied complete with nut and washer.
  • The studs have external hexagon drive units with one drive unit in each box.
  • Each stud has a depth mark to indicate correct setting depth and a chisel point to facilitate appropriate mixing when using glass spin in capsules.
Options Available £14.70Options Available £85.15 Ex Tax: £12.25 / £70.96
  • Grade 5.8 zinc and clear passivated to 5 microns studs for use with J-Fix Glass Spin In Capsules or J-Fix Injection Resin Systems, supplied complete with nut and washer.
  • The studs have external hexagon drive units with one drive unit in each box.
  • Each stud has a depth mark to indicate correct setting depth and a chisel point to facilitate appropriate mixing when using glass spin in capsules.
Options Available £4.28Options Available £22.88 Ex Tax: £3.57 / £19.07
  • Grade A2/304 Stainless Steel Studs for use with J-Fix Glass Spin In Capsules or J-Fix Injection Resin Systems, supplied complete with nut and washer.
  • The studs have external hexagon drive units with one drive unit in each box.
  • Each stud has a depth mark to indicate correct setting depth and a chisel point to facilitate appropriate mixing when using glass spin in capsules.
Options Available £12.91Options Available £62.10 Ex Tax: £10.76 / £51.75
  • The Epoxy Acrylate, Hammer In Capsules are suitable for use in solid concrete and natural stone.
  • They can be used with reinforcing bar or threaded rods and can achieve high loads by using two capsules at double embedment depth.
Options Available £10.16Options Available £30.53 Ex Tax: £8.47 / £25.44
  • Grade A2/304 Stainless Steel Studs for use with J-Fix Glass Spin In Capsules or J-Fix Injection Resin Systems, supplied complete with nut and washer.
  • The studs have external hexagon drive units with one drive unit in each box.
  • Each stud has a depth mark to indicate correct setting depth and a chisel point to facilitate appropriate mixing when using glass spin in capsules.
£0.00 Ex Tax: £0.00
  • Grade 5.8 zinc and clear passivated to 5 microns studs for use with J-Fix Glass Spin In Capsules or J-Fix Injection Resin Systems, supplied complete with nut and washer.
  • The studs have external hexagon drive units with one drive unit in each box.
  • Each stud has a depth mark to indicate correct setting depth and a chisel point to facilitate appropriate mixing when using glass spin in capsules.
£0.00 Ex Tax: £0.00
  • A range of brushes for cleaning dust from holes prior to the fixing being installed.
£0.00 Ex Tax: £0.00
  • A permanent threaded socket for use with the J-Fix injection resin systems.
  • An internal socket for use with injection resin in solid masonry or brickwork.
  • Suitable for use with set screws, bolts, or threaded rod.
£0.00 Ex Tax: £0.00
  • A range of nylon and metal sleeves to enable the use of J-Fix injection systems in hollow blocks and bricks.
£0.00 Ex Tax: £0.00
  • A permanent threaded socket for use with glass capsules or the J-Fix injection resin systems.
  • The internal threaded socket provides a flush fixing which allows for the attachment of a suitable bolt or threaded rod.
  • Available in zinc plated or stainless steel versions.
£0.00 Ex Tax: £0.00
  • A permanent socket for use with glass capsules or J-Fix injection resin systems.
  • The internal threaded sockets provide a flush fixing which allows for the attachment of a suitable bolt or threaded rod.
  • Available in zinc or stainless steel.
£0.00 Ex Tax: £0.00
  • A range of tools for use with the J-Fix injection resin systems
£0.00 Ex Tax: £0.00
  • Zinc plated and clear passivated to 5 microns, plain ended studs for use with injection resin.
  • Grade 5.8.
£0.00 Ex Tax: £0.00
  • The spin in glass capsule anchor is used with the threaded studs to provide a stress free anchorage in concrete.
  • The quartz aggregate contained in the capsule enable the anchor to acheive exceptional loads.
£0.00 Ex Tax: £0.00
  • Blow out pumps are manufactured from strong and durable plastic.
  • They are designed with large capacity for clearing debris from freshly drilled holes to allow firm anchorage.
£0.00 Ex Tax: £0.00
  • The Forgefix resin injection system offers an easy fixing capability for numerous applications.
  • It can also be used as a high impact adhesive.
  • The resin requires a specialist applicator gun, and a wire brush is recommended on smoother substrates to allow better adhesion.
£0.00 Ex Tax: £0.00
  • The chemical anchor resin nozzles are specially designed mixer nozzles, which eliminate the need to mix mortar on site.
  • Suitable for use with the 150ml, 300ml and 380ml resin.
£0.00 Ex Tax: £0.00