TIK Products 380ml Chemical Anchor Resin

TIK Resin Fix is a high performance chemical resin. Suitable for use in concrete, brickwork and stone. Fast curing two-part chemical anchoring. Suitable for fixing wall ties, starter bars, studs and bolts. The system is based on unsaturated Polyester. Suitable for close edge fixings. Pre-packed 10:1 ratio resin in vinyl-toluene monomer. Chemically resistant, waterproof and vibration proof. Each tube comes supplied with a nozzle. Extra nozzles are available separately

The chemical resin has a shelf life of 1 year from date of manufacturer (usually within 2 weeks of your order), when kept at a temperature of between 5 and 30 degrees celcius.

How to use:

Unscrew the cap from the cartridge and screw on the static mixer nozzle. Fit the cartridge into the applicator gun and gradually apply pressure to the trigger until the material exudes from the end of the nozzle. You should always waste the first 10ml or so of resin until you get an even colour. Insert the nozzle into the hole and gun the material out, removing the nozzle slowly as the hole fills up. Once sufficient resin is in the hole, release the pressure from the gun and place the stud to be fixed into the hole with a twisting action to ensure full contact between hole, resin and stud. Allow resin to cure fully before loading. Please see label on cartridge for full installation instructions.

Specification sheets available upon request - just contact us for a copy.

Technical Specification

Gel and Cure Times

Fixings Per Cartridge