Socket Screws

• Socket caps have a small cylindrical head with tall vertical sides.
• They have a drive which is a six-sided recess for use with a hex key.
• Manufactured to DIN 912 standards.
• Specially manufactured to have a lower head.
• Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

• These buttton socket screws are stainless steel.
• Manufactured to ISO 7380 standards.
• The head is designed to be driven by a hex key.
• Stainless steel grade 304 (A2) for increased resistance to corrosion.

• Socket caps have a small cylindrical head with tall vertical sides.
• They have a drive which is a six-sided recess for use with a hex key.
• Manufactured to DIN 912 standards.
• Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

• Socket caps have a small cylindrical head with tall vertical sides.
• They have a drive which is a six-sided recess for use with a hex key.
• Manufactured to DIN 912 standards.
• Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

• Socket caps have a small cylindrical head with tall vertical sides.
• They have a drive which is a six-sided recess for use with a hex key.
• Manufactured to DIN 912 standards.

• Thermo-Forged of alloy steel and scientifically heat treated, they are stronger than conventional screws, size for size.
• Fewer screws � or smaller screws � are required to fulfill a given holding assignment.
• As a general rule, a Holo-Krome cap screw is comparable in strength to an ordinary screw of the next larger standard diameter.

• These buttton socket screws are stainless steel.
• Manufactured to ISO 7380 standards.
• The head is designed to be driven by a hex key.
• Stainless steel grade 304 (A2) for increased resistance to corrosion.

• When placed into a conical cut hole, the countersunk head will sit flush with or below the surface of the surrounding material, improving the finish of the product and removing any potential trip / catch hazard.
• The head is designed to be driven by a hex key.
• Stainless steel grade 304 (A2) for increased resistance to corrosion.

• Thermo-Forged of alloy steel and scientifically heat treated, they are stronger than conventional screws, size for size.
• Fewer screws or smaller screws are required to fulfill a given holding assignment.
• As a general rule, a Holo-Krome cap screw is comparable in strength to an ordinary screw of the next larger standard diameter.

• Thermo-Forged of alloy steel and scientifically heat treated, they are stronger than conventional screws, size for size.
• Fewer screws or smaller screws are required to fulfill a given holding assignment.
• As a general rule, a Holo-Krome cap screw is comparable in strength to an ordinary screw of the next larger standard diameter.

• Socket caps have a small cylindrical head with tall vertical sides.
• They have a drive which is a six-sided recess for use with a hex key.
• Manufactured to DIN 912 standards.

• Thermo-Forged of alloy steel and scientifically heat treated, they are stronger than conventional screws, size for size.
• Fewer screws

• Thermo-Forged of alloy steel and scientifically heat treated, they are stronger than conventional screws, size for size.
• Fewer screws

• These hex head set screws are made from 304 (A2) grade stainless steel.
• Provides protection against corrosion.
• They are fully threaded and conform to DIN 933 standards.
• Can be used with many nut types and washers.

• These buttton socket screws are stainless steel.
• Manufactured to ISO 7380 standards.
• The head is designed to be driven by a hex key.
• Stainless steel grade 304 (A2) for increased resistance to corrosion.

• When placed into a conical cut hole, the countersunk head will sit flush with or below the surface of the surrounding material, improving the finish of the product and removing any potential trip / catch hazard.
• The head is designed to be driven by a hex key.
• Stainless steel grade 304 (A2) for increased resistance to corrosion.

• Socket caps have a small cylindrical head with tall vertical sides.
• They have a drive which is a six-sided recess for use with a hex key.
• Manufactured to DIN 912 standards.

• These buttton socket screws are self colour.
• Manufactured to ISO 7380 grade 10.9 standards.
• The head is designed to be driven by a hex key.
• Self colour finish.

• Holo-Krome button head cap screws contribute in important ways in carrying out modern design techniques which call for smooth contours and surfaces, elimination of clumsy, bulky parts and use of lighter constructions as they apply to flanges, lugs, pockets, and cover plates.
• They are stronger than conventional screws, size for size.
• Fewer screws

• When placed into a conical cut hole, the countersunk head will sit flush with or below the surface of the surrounding material, improving the finish of the product and removing any potential trip / catch hazard.
• The head is designed to be driven by a hex key.
• Self colour finish.

• Holo-Krome offers flat head Screws in 95 standard sizes.
• These heavy-duty screws are especially well suited to fastening thin plates, strips, moldings, and sheet metal parts where the advantages of maximum head contact, flush surfaces and nonslip wrenching action are combined.

• Socket caps have a small cylindrical head with tall vertical sides.
• They have a drive which is a six-sided recess for use with a hex key.
• Manufactured to DIN 912 standards.
• Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

• Thermo-Forged of alloy steel and scientifically heat treated, they are stronger than conventional screws, size for size.
• Fewer screws or smaller screws are required to fulfill a given holding assignment.
• As a general rule, a Holo-Krome cap screw is comparable in strength to an ordinary screw of the next larger standard diameter.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

• These buttton socket screws are stainless steel.
• Manufactured to ISO 7380 standards.
• The head is designed to be driven by a hex key.
• Stainless steel grade 304 (A2) for increased resistance to corrosion.

• When placed into a conical cut hole, the countersunk head will sit flush with or below the surface of the surrounding material, improving the finish of the product and removing any potential trip / catch hazard.
• The head is designed to be driven by a hex key.
• Stainless steel grade 304 (A2) for increased resistance to corrosion.

• Socket caps have a small cylindrical head with tall vertical sides.
• They have a drive which is a six-sided recess for use with a hex key.
• Manufactured to DIN 912 standards.
• Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

• These buttton socket screws are stainless steel.
• Manufactured to ISO 7380 standards.
• The head is designed to be driven by a hex key.
• Stainless steel grade 304 (A2) for increased resistance to corrosion.

• When placed into a conical cut hole, the countersunk head will sit flush with or below the surface of the surrounding material, improving the finish of the product and removing any potential trip / catch hazard.
• The head is designed to be driven by a hex key.
• Stainless steel grade 304 (A2) for increased resistance to corrosion.

• Socket caps have a small cylindrical head with tall vertical sides.
• They have a drive which is a six-sided recess for use with a hex key.
• Manufactured to DIN 912 standards.
• Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

• These buttton socket screws are self colour.
• Manufactured to ISO 7380 grade 10.9 standards.
• The head is designed to be driven by a hex key.
• Self colour finish.

• Holo-Krome button head cap screws contribute in important ways in carrying out modern design techniques which call for smooth contours and surfaces, elimination of clumsy, bulky parts and use of lighter constructions as they apply to flanges, lugs, pockets, and cover plates.
• They are stronger than conventional screws, size for size.
• Fewer screws

• When placed into a conical cut hole, the countersunk head will sit flush with or below the surface of the surrounding material, improving the finish of the product and removing any potential trip / catch hazard.
• The head is designed to be driven by a hex key.
• Self colour finish.

• Holo-Krome offers flat head Screws in 95 standard sizes.
• These heavy-duty screws are especially well suited to fastening thin plates, strips, moldings, and sheet metal parts where the advantages of maximum head contact, flush surfaces and nonslip wrenching action are combined.

• Low head socket head cap screws are high strength, precision fasteners that are designed to be used in applications where head height is a problem.
• Because of their reduced head height and smaller socket size, they cannot be preloaded as high as a standard socket head cap screw.

• Socket caps have a small cylindrical head with tall vertical sides.
• They have a drive which is a six-sided recess for use with a hex key.
• Manufactured to DIN 912 standards.
• Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

• Thermo-Forged of alloy steel and scientifically heat treated, they are stronger than conventional screws, size for size.
• Fewer screws or smaller screws are required to fulfill a given holding assignment.
• As a general rule, a Holo-Krome cap screw is comparable in strength to an ordinary screw of the next larger standard diameter.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

• Socket caps have a small cylindrical head with tall vertical sides.
• They have a drive which is a six-sided recess for use with a hex key.
• Manufactured to DIN 912 standards.
• Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

• These buttton socket screws are stainless steel.
• Manufactured to ISO 7380 standards.
• The head is designed to be driven by a hex key.
• Stainless steel grade 304 (A2) for increased resistance to corrosion.

• When placed into a conical cut hole, the countersunk head will sit flush with or below the surface of the surrounding material, improving the finish of the product and removing any potential trip / catch hazard.
• The head is designed to be driven by a hex key.
• Stainless steel grade 304 (A2) for increased resistance to corrosion.

• These buttton socket screws are self colour.
• Manufactured to ISO 7380 grade 10.9 standards.
• The head is designed to be driven by a hex key.
• Self colour finish.