Your shopping cart is empty!
- Packing used to adjust the tail length of the AF High Friction clamps to meet differing beam flange thicknesses.
£0.00 Ex Tax: £0.00
- Packing used to adjust the tail length of the AF High Friction clamps to meet differing beam flange thicknesses.
£0.00 Ex Tax: £0.00
- Packing used to adjust the tail length of the AF High Friction clamps to meet differing beam flange thicknesses.
£0.00 Ex Tax: £0.00
- The Alphawedge is designed for Ribdeck E60 manufactured by Hare Decking, formerly Richard Lees Steel Decking.
£0.00 Ex Tax: £0.00
- The Type CF allows a fast steelwork fixing connection.
- It is a high friction clamp which hooks over flanges of I-beams, angles and channels.
- Lindapter markings act as a unique anti-rotation device.
- Can be combined with all Lindapter Girder Clamp products including Type AF.
£0.00 Ex Tax: £0.00
- A two part flange clamp with large clamping range.
- The bolt can be substituted with either drop rod or J bolts.
- For parallel flanges only.
£0.00 Ex Tax: £0.00
- Flange Clamp for connecting all types of parallel running steelwork with flanges of the same width.
- Can be used with bolts or alternatively with threaded rod.
- Not suitable for tapered flanges.
£0.00 Ex Tax: £0.00
- The Flush Clamp is a Girder Clamp System without the need of a location plate.
- Suitable for connecting beams of varying widths and thicknesses.
- Suitable for flanges up to 10 degree slope.
£0.00 Ex Tax: £0.00
- An innovative connection for securing steel floor plates, also known as chequer plates, Durbar floor plates, diamond plates or tread plates.
- The Floorfast consists of a malleable iron body casting with a countersunk socket screw; the eccentric stepped web of the casting allows it to lock under the steelwork providing full face contact when torque is applied.
£0.00 Ex Tax: £0.00
- Beam Clamp suitable for use with parallel or tapered flange beams, supplied with the back hole drilled or tapped.
- The type FL uses a grade 8.8 cup point setscrew for secure grip.
- Supplied with square or alternatively hexagon head setscrews.
- Can be used with type SW Swivel Unit when connecting to inclined sections.
£0.00 Ex Tax: £0.00
- Beam flange clamp with swivel unit.
- For parallel and sloping flanges.
- Supplied with grade 8.8 setscrew for secure grip.
£0.00 Ex Tax: £0.00
- Grating fixing for rectangular open bar grating with cast main body giving superior clamping force.
- GF10HDG with wider top-hat bracket for different grating sizes and hot dip galvanised for corrosion resistance.
- GF210HDG for use with 30mm width floor grating bars only.
- GF08 with stainless steel top-hat bracket for GRP grating.
£0.00 Ex Tax: £0.00
- The countersunk head version of the Hollo-Bolt is suitable for hollow sections or conventional steelwork where access is available from one side only.
- It also ensures that the fixing protrusion from the steelwork is kept to a minimum whilst still using a plain drilled hole in the supporting section and the outer plate / bracket.
£0.00 Ex Tax: £0.00
- The Flush Fit version of the Hollo-Bolt, the original expansion bolt for structural steel.
- The Flush Fit version merges the technical advantages of the distinguished Hollo-Bolt with the aesthetic benefits of a discreet fixing and is suitable for hollow sections or conventional steelwork where access is available from one side only.
£0.00 Ex Tax: £0.00
- The original expansion bolt for structural steel.
- Suitable for hollow sections, tubes and where access is available from one side only.
- The only expansion bolt to have full Seismic approval for resisting wind loads and seismic loads.
- For corrosion protection the Hollo-Bolt comes with additional JS500 protection as standard or hot dip galvanised.
£0.00 Ex Tax: £0.00
- The Hollo-Bolt is the only structural steel expansion bolt that has a full Seismic approval.
- Designed for hollow sections, tubes and where access is available from one side only.
- Appropriate for highly corrosive environments and where the parent material is stainless steel.
£0.00 Ex Tax: £0.00
- The original expansion bolt for structural steel.
- Suitable for hollow sections, tubes and where access is available from one side only.
- The only expansion bolt to have full Seismic approval for resisting wind loads and seismic loads.
- For corrosion protection the Hollo-Bolt comes with additional JS500 protection as standard or hot dip galvanised.
£0.00 Ex Tax: £0.00
- For vertical suspension on angled surface of up to 10 degree swing either side of the vertical.
- The hemispherical washer (HW) can be used without the cup.
- Loads are subject to applications - please contact us.
£0.00 Ex Tax: £0.00
- The original threaded stud expansion bolt.
- Self heading bolt suitable for fixing to hollow-sections, tubes and applications where access is available from one side only.
- The Lindibolt uses a standard clearance hole.
£0.00 Ex Tax: £0.00
- Self adjusting clamp for various flange thicknesses and slopes upto 15 degrees.
- The leg of the saddle prevents the clamp rotating during installation.
- The LR tail spans slotted holes.
£0.00 Ex Tax: £0.00
- The Type MF is designed for MetFloor 60 & Metfloor 80 profiles manufactured by Composite Metal Flooring (CMF).
£0.00 Ex Tax: £0.00
- The Multiwedge 2 is designed for Multideck 60 and Multideck 80 profiles manufactured by Kingspan Structural Products./ul>
£0.00 Ex Tax: £0.00
- The Type TC, Toggle Clamp is designed for service suspension from pre-cast hollow core slabs (minimum depth of core 75mm) as well as Structural Hollow Section (SHS), steel sheeting or purlins.
£0.00 Ex Tax: £0.00
- The Type TR60 is designed for TR60+ and TR80+ profiles manufactured by Structural Metal Decks.
£0.00 Ex Tax: £0.00
- The V-Nut fits the re-entrant channel of several composite floor deckings.
- Including: R51 (SMD), ComFlor 51 (Tata Steel),Holorib (Hare Decking), Superib (Hare Decking), Multideck 50 (Kingspan) and MetFloor 55 (CMF)
£0.00 Ex Tax: £0.00
- The Webfix � WF for a quick installation directly from the web of Zed purlins.
£0.00 Ex Tax: £0.00
- A purlin clip to suit a large range of purlin sections.
- Can be used with type SW � Swivel Unit for use on inclined purlins.
£0.00 Ex Tax: £0.00
- Designed for use with Tata steel's Comflor 60 and Comflor 80.
- They are ideal for suspending cables, pipework and HVAC systems.
- They are quick and easy to install, adjustable on-site and no expensive tools are required for installation
£102.73 Ex Tax: £85.61