Your shopping cart is empty!
- These Forgefix TechFast Hex Head Roofing Screws are designed for fixing cladding and sheet steel to heavy section steel purlins of between 6.0mm and 12.5mm.
- The screws have a hex head, are self-drilling and have a rubber washer which expands under pressure to form a permanent weather seal.
- They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours.
£0.00 Ex Tax: £0.00
- These Forgefix TechFast Hex Head Roofing Screws are designed for fixing cladding and sheet steel to light section steel purlins of between 1.2mm and 3.6mm.
- The screws have a hex head, are self-drilling and have a rubber washer which expands under pressure to form a permanent weather seal.
- They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours.
£0.00 Ex Tax: £0.00
- These Forgefix TechFast Hex Head Screws are designed specifically for fixing cladding and sheet metal to timber frame work.
- They have a Hex slash point head and are self-drilling for speedy insertion.
£0.00 Ex Tax: £0.00
- These Forgefix TechFast Roofing Screws are designed for use in joining timber to steel and for light section purlins.
- They have a Torx, countersunk head to sit flush to the surface.
- The self-drilling point enables speedy insertion, and the wings create a clearance hole in the timber to eliminate the chance of 'jacking' when fixing.
£0.00 Ex Tax: £0.00
- These Forgefix TechFast Roofing Screws are designed for use in joining timber to steel and for heavy section purlins.
- They have a Torx, countersunk head to sit flush to the surface.
- The self-drilling point enables speedy insertion, and the wings create a clearance hole in the timber to eliminate the chance of 'jacking' when fixing.
£0.00 Ex Tax: £0.00
- Dry wall screws.
- Phillips head.
- Fine thread screw.
£0.00 Ex Tax: £0.00
- Used to repair or fill small holes and imperfections.
- Provides a smooth finish for painting.
£0.00 Ex Tax: £0.00
- A thumbscrew is a type of screw drive with either a tall head and ridged or knurled sides, or a key-like flat sided vertical head.
- They are intended to be tightened and loosened by hand, and not found in structural applications.
- Available with, or without a shoulder.
£0.00 Ex Tax: £0.00
- A thumbscrew is a type of screw drive with either a tall head and ridged or knurled sides, or a key-like flat sided vertical head.
- They are intended to be tightened and loosened by hand, and not found in structural applications.
- Available with, or without a shoulder.
£0.00 Ex Tax: £0.00
- Surface screw cups
- Nickel plated
£0.00 Ex Tax: £0.00
- Dome cup and washers.
- Available in a variety of colours.
£0.00 Ex Tax: £0.00
- M hooks are universal for many applications.
- Zinc plated for protection against corrosion
£0.00 Ex Tax: £0.00
- Screw eyes are zinc plated for increased resistance to corrosion.
- They simply screw directly into timber and similar materials.
- Drilling a pilot hole is advisable.
- The screws are also suitable for use with all types of wall plugs.
£0.00 Ex Tax: £0.00
- Vine eyes simply screw into timber and similar materials.
- Drilling a pilot hole is advisable.
- The screws are zinc plated for increased resistacne to corrosion, and the screw thread is suitable for use with all types of wall plugs.
- Zinc plated for protection against corrosion.
£0.00 Ex Tax: £0.00
- Tamper proof screw.
- Can be installed using a flat head screwdriver.
- Head makes it exceedingly difficult to remove
- Zinc plated for corrosion resistance
£0.00 Ex Tax: £0.00
- Countersunk head (flange head available).
- Self countersinking.
- Robust thread designed for easy penetration whilst offering maximum pull out strength.
- Bright zinc plated and yellow zinc plating available for weather resistance, and ideal for treated timber.
- Self drilling point eliminates the need for pre-drilling.
- Torx drive for ease of use and speed with power tools.
£0.00 Ex Tax: £0.00
- Flange head (countersunk head available).
- Self countersinking.
- Robust thread designed for easy penetration whilst offering maximum pull out strength.
- Bright zinc plated and yellow zinc plating available for weather resistance, and ideal for treated timber.
- Self drilling point eliminates the need for pre-drilling.
- Torx drive for ease of use and speed with power tools.
£0.00 Ex Tax: £0.00
- Drywall screw with a bugle head, self drill and zinc plated for increased durability.
- Self drilling hardened point designed for fitting dry linings to steel framework without drilling pilot holes.
£0.00 Ex Tax: £0.00
- Black phosphate coated zinc for rust resistance.
- 100 per strip.
- Bugle head for below-surface finishing without tearing the board skin.
- Philips head.
£0.00 Ex Tax: £0.00
- Drywall screw with a pan head, self drill and zinc plated for increased durability.
- Self drilling hardened point designed for fitting dry linings to steel framework without drilling pilot holes.
£0.00 Ex Tax: £0.00
- These drywall screws have a black phosphate finish for increased durability.
- Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface.
- Designed for fitting dry linings to studding.
£0.00 Ex Tax: £0.00
- These drywall screws have a zinc yellow plated finish for increased durability.
- Their bugle head allows the screw to sink effortlessly into the dry lining eithout the need for countersinking, which in turn minimises the damage to the surface.
£0.00 Ex Tax: £0.00
- Most of our security fasteners require a matching driver forinstallation and removal.
- These are supplied individually
£0.00 Ex Tax: £0.00
- Single thread pozi countersunk woodscrews.
- Bright zinc plated for increased protection against corrosion.
£0.00 Ex Tax: £0.00
- Twinthread pozi countersunk woodscrews.
- Bright zinc plated for increased protection against corrosion.
£0.00 Ex Tax: £0.00
- These Forgefix traditional slotted, single thread Wood Screws have countersunk heads and can be used in many internal and external applications.
- They have a solid brass construction to avoid corrosion.
£0.00 Ex Tax: £0.00