save our number 0800 009 6949 and message us through WhatsApp

Nuts

Nuts
Show:
Sort By:
  • Philidas industrial nuts.
  • All metal one piece nut with a collar.
  • Two slots, in the same plane, are cut in the collar and the metal above the slots is set to depitch the threads. When the nut is tightened on to a bolt, the thread is gripped on the flank - the point at which it is designed to take the thrust.
  • Suitable for use in high and low temperatue conditions.
  • Self colour finish
£0.00 Ex Tax: £0.00
  • Philidas industrial nuts.
  • All metal one piece nut with a collar.
  • Two slots, in the same plane, are cut in the collar and the metal above the slots is set to depitch the threads. When the nut is tightened on to a bolt, the thread is gripped on the flank - the point at which it is designed to take the thrust.
  • Suitable for use in high and low temperatue conditions.
  • Zinc yellow plated.
£0.00 Ex Tax: £0.00
  • Philidas Mk V nuts.
  • It has a relatively high prevailing torque, which is obtained by two-point deforming for consistent characteristics across load-bearing threads.
  • These nuts can be re-used.
  • Zinc yellow plated.
£0.00 Ex Tax: £0.00
  • Philidas Turret nuts.
  • A Turret nut has two slots and is self locking.
  • Self colour finish.
£0.00 Ex Tax: £0.00
  • Philidas Turret nuts.
  • A Turret nut has two slots and is self locking.
  • Zinc yellow plated.
£0.00 Ex Tax: £0.00
  • Serrated flange nuts.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are stainless steel grade 304 (A2) or 316 (A4) for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut (type P) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • Type P are slightly taller than the type T version.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are zinc-plated for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are stainless steel grade 304 (A2) or 316 (A4) for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut (type P) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • Type P are slightly taller than the type T version.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are zinc-plated for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • Serrated flange nuts.
  • Bright zinc plated CR3+ grade 8.8 DIN6923.
£0.00 Ex Tax: £0.00
  • Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
  • The nuts are bright zinc plated for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are stainless steel grade 304 (A2) or 316 (A4) for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut (type P) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • Type P are slightly taller than the type T version.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are zinc-plated for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • Serrated flange nuts.
  • Bright zinc plated CR3+ grade 8.8 DIN6923.
£0.00 Ex Tax: £0.00
  • Serrated flange nuts.
  • Bright zinc plated CR3+ grade 8.8 DIN6923.
£0.00 Ex Tax: £0.00
  • Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
  • The nuts are available in stainless steel grades 304 (A2) and 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
  • The nuts are available in stainless steel grades 304 (A2) and 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
  • The nuts are available in stainless steel grades 304 (A2) and 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00