Nuts - Zinc Plated

Nuts - Zinc Plated

Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.

Show:
Sort By:
  • Philidas industrial nuts.
  • All metal one piece nut with a collar.
  • Two slots, in the same plane, are cut in the collar and the metal above the slots is set to depitch the threads. When the nut is tightened on to a bolt, the thread is gripped on the flank - the point at which it is designed to take the thrust.
  • Suitable for use in high and low temperatue conditions.
  • Zinc yellow plated.
£0.00 Ex Tax: £0.00
  • Philidas Mk V nuts.
  • It has a relatively high prevailing torque, which is obtained by two-point deforming for consistent characteristics across load-bearing threads.
  • These nuts can be re-used.
  • Zinc yellow plated.
£0.00 Ex Tax: £0.00
  • Philidas Turret nuts.
  • A Turret nut has two slots and is self locking.
  • Zinc yellow plated.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut (type P) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • Type P are slightly taller than the type T version.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are zinc-plated for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut (type P) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • Type P are slightly taller than the type T version.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are zinc-plated for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • Serrated flange nuts.
  • Bright zinc plated CR3+ grade 8.8 DIN6923.
£0.00 Ex Tax: £0.00
  • Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
  • The nuts are bright zinc plated for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut (type P) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • Type P are slightly taller than the type T version.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are zinc-plated for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • Serrated flange nuts.
  • Bright zinc plated CR3+ grade 8.8 DIN6923.
£0.00 Ex Tax: £0.00
  • Serrated flange nuts.
  • Bright zinc plated CR3+ grade 8.8 DIN6923.
£0.00 Ex Tax: £0.00
  • Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
  • The nuts are bright zinc plated for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Dome nuts provide a more aesthetically pleasing finish to a standard nut.
  • Bright zinc plated CR3+ DIN1587.
£0.00 Ex Tax: £0.00
  • Dome nuts provide a more aesthetically pleasing finish to a standard nut.
  • Bright zinc plated CR3+ DIN1587.
£0.00 Ex Tax: £0.00
  • Dome nuts provide a more aesthetically pleasing finish to a standard nut.
  • Bright zinc plated CR3+ DIN1587.
£0.00 Ex Tax: £0.00
  • Dome nuts provide a more aesthetically pleasing finish to a standard nut.
  • Bright zinc plated CR3+ DIN1587.
£0.00 Ex Tax: £0.00
  • These hexagon half nuts are self colour without any corrosion resistance.
  • Self colour.
£0.00 Ex Tax: £0.00
  • These hexagon half nuts are zinc plated for increased resistance to corrosion.
  • Self colour.
£0.00 Ex Tax: £0.00
  • Hexagon half nuts.
  • Bright zinc plated CR3+ DIN439B.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut (type P) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • Type P are slightly taller than the type T version.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are zinc-plated for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • Serrated flange nuts.
  • Bright zinc plated CR3+ grade 8.8 DIN6923.
£0.00 Ex Tax: £0.00
  • These shear nuts are zinc plated.
  • They provide a high security, permanent fastening, as the hexagonal part of the nut shears off at a pre-determined torque, leaving a totally tamper-proof cone.
£0.00 Ex Tax: £0.00
  • Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
  • The nuts are bright zinc plated for increased corrosion resistance.
£0.00 Ex Tax: £0.00