Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.
A nyloc hexagon nut (type T) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
The nylon component has a smaller inside diameter than the actual nut.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
They provide a high security, permanent fastening, as the hexagonal part of the nut shears off at a pre-determined torque, leaving a totally tamper-proof cone.
They provide a high security, permanent fastening, as the hexagonal part of the nut shears off at a pre-determined torque, leaving a totally tamper-proof cone.
They provide a high security, permanent fastening, as the hexagonal part of the nut shears off at a pre-determined torque, leaving a totally tamper-proof cone.
These locknuts are vibration resistant self-locking nuts, which are resistant to shocks, vibration and dynamic loads – and they can be reused a number of times.
The locking function is achieved by the deformation of part of the nut. The nut will run smoothly until it reaches the deformed part, after which the clamping force will increase.
These locknuts are vibration resistant self-locking nuts, which are resistant to shocks, vibration and dynamic loads – and they can be reused a number of times.
The locking function is achieved by the deformation of part of the nut. The nut will run smoothly until it reaches the deformed part, after which the clamping force will increase.
A nyloc hexagon nut (type P) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
The nylon component has a smaller inside diameter than the actual nut.
Type P are slightly taller than the type T version.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut (type T) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
The nylon component has a smaller inside diameter than the actual nut.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut (type P) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
The nylon component has a smaller inside diameter than the actual nut.
Type P are slightly taller than the type T version.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut (type T) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
The nylon component has a smaller inside diameter than the actual nut.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut (type P) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
The nylon component has a smaller inside diameter than the actual nut.
Type P are slightly taller than the type T version.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut (type T) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
The nylon component has a smaller inside diameter than the actual nut.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut (type T) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
The nylon component has a smaller inside diameter than the actual nut.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut (type T) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
The nylon component has a smaller inside diameter than the actual nut.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut (type T) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
The nylon component has a smaller inside diameter than the actual nut.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut (type T) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
Grade 10 for increased tensile strength.
The nylon component has a smaller inside diameter than the actual nut.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut (type P) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
The nylon component has a smaller inside diameter than the actual nut.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are yellow zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut (type P) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
The nylon component has a smaller inside diameter than the actual nut.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are yellow zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
Fine thread.
The nylon component has a smaller inside diameter than the actual nut.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
UNF thread.
The nylon component has a smaller inside diameter than the actual nut.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
UNC thread.
The nylon component has a smaller inside diameter than the actual nut.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
UNC thread.
The nylon component has a smaller inside diameter than the actual nut.
This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
The nuts are zinc-plated for increased resistance to corrosion.
Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.