Nuts - Stainless Steel

Nuts - Stainless Steel

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties or steel and corrosion resistance are required.

Show:
Sort By:
  • Serrated flange nuts.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are stainless steel grade 304 (A2) or 316 (A4) for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are stainless steel grade 304 (A2) or 316 (A4) for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are stainless steel grade 304 (A2) or 316 (A4) for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
  • The nuts are available in stainless steel grades 304 (A2) and 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
  • The nuts are available in stainless steel grades 304 (A2) and 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
  • The nuts are available in stainless steel grades 304 (A2) and 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Dome nuts provide a more aesthetically pleasing finish to a standard nut.
  • Stainless steel grade 304 (A2).
£0.00 Ex Tax: £0.00
  • Dome nuts provide a more aesthetically pleasing finish to a standard nut.
  • Stainless steel grade 304 (A2).
£0.00 Ex Tax: £0.00
  • Dome nuts provide a more aesthetically pleasing finish to a standard nut.
  • Stainless steel grade 304 (A2).
£0.00 Ex Tax: £0.00
  • Dome nuts provide a more aesthetically pleasing finish to a standard nut.
  • Stainless steel grade 304 (A2) or 316 (A4)).
£0.00 Ex Tax: £0.00
  • Hexagon half nuts.
  • Stainless steel grade 304 (A2) or 316 (A4).
£0.00 Ex Tax: £0.00
  • Hexagon half nuts.
  • Stainless steel grade 304 (A2) or 316 (A4) .
£0.00 Ex Tax: £0.00
  • Hexagon half nuts.
  • Stainless steel grade 304 (A2) or 316 (A4) .
£0.00 Ex Tax: £0.00
  • Hexagon half nuts.
  • Stainless steel grade 304 (A2) or 316 (A4) .
£0.00 Ex Tax: £0.00
  • Hexagon half nuts.
  • Stainless steel grade 304 (A2) or 316 (A4) .
£0.00 Ex Tax: £0.00
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are stainless steel grade 304 (A2) or 316 (A4) for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
  • The nuts are available in stainless steel grades 304 (A2) and 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Dome nuts provide a more aesthetically pleasing finish to a standard nut.
  • Stainless steel grade 304 (A2) or 316 (A4)).
£0.00 Ex Tax: £0.00
  • Hexagon half nuts.
  • Stainless steel grade 304 (A2) or 316 (A4) .
£0.00 Ex Tax: £0.00
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are stainless steel grade 304 (A2) or 316 (A4) for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
  • The nuts are available in stainless steel grades 304 (A2) and 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Dome nuts provide a more aesthetically pleasing finish to a standard nut.
  • Stainless steel grade 304 (A2) or 316 (A4)).
£0.00 Ex Tax: £0.00
  • Hexagon half nuts.
  • Stainless steel grade 304 (A2) or 316 (A4) .
£0.00 Ex Tax: £0.00
  • Hexagon weld nuts provide a more aesthetically pleasing finish to a standard nut.
  • Stainless steel grade 304 (A2).
£0.00 Ex Tax: £0.00
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are stainless steel grade 304 (A2) or 316 (A4) for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
  • The nuts are available in stainless steel grades 304 (A2) and 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Dome nuts provide a more aesthetically pleasing finish to a standard nut.
  • Stainless steel grade 304 (A2) or 316 (A4)).
£0.00 Ex Tax: £0.00
  • Hexagon half nuts.
  • Stainless steel grade 304 (A2) or 316 (A4) .
£0.00 Ex Tax: £0.00
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are stainless steel grade 304 (A2) or 316 (A4) for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£0.00 Ex Tax: £0.00
  • Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
  • The nuts are available in stainless steel grades 304 (A2) and 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00