Nuts

• Serrated flange nuts.
• Bright zinc plated CR3+ grade 8.8 DIN6923.

• These shear nuts are galvanised.
• They provide a high security, permanent fastening, as the hexagonal part of the nut shears off at a pre-determined torque, leaving a totally tamper-proof cone.

• These shear nuts are zinc plated.
• They provide a high security, permanent fastening, as the hexagonal part of the nut shears off at a pre-determined torque, leaving a totally tamper-proof cone.

• Square nuts,
• Bright zinc plated CR3+.

• Square nuts,
• Bright zinc plated CR3+.

• Square pressed nuts,
• Bright zinc plated CR3+.

• Wedge nuts.
• Bright zinc plated CR3+.

• Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
• The nuts are available in stainless steel grades 304 (A2) and 316 (A4) for increased corrosion resistance.

• Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
• The nuts are bright zinc plated for increased corrosion resistance.

• Channel nuts.
• Galvanised.

• Channel nuts.
• Bright zinc plated CR3+.

• Channel nuts.
• Bright zinc plated CR3+.

• Channel nuts.
• Bright zinc plated CR3+.

• Dome nuts provide a more aesthetically pleasing finish to a standard nut.
• Stainless steel grade 304 (A2) or 316 (A4)).

• Dome nuts provide a more aesthetically pleasing finish to a standard nut.
• Bright zinc plated CR3+ DIN1587.

• Hexagon half nuts.
• Stainless steel grade 304 (A2) or 316 (A4) .

• These hexagon half nuts are self colour without any corrosion resistance.
• Self colour.

• Hexagon half nuts.
• Bright zinc plated CR3+ DIN439B.

• These hexagon half nuts are self colour without any corrosion resistance.
• Self colour.

• Steel 4 pronged tee nuts.
• A tee nut (or blind nut) is a type of nut used to fasten wood, particle or composite materials, leaving a flush surface.
• The flanges of the tee nut have hooks or serrations on the prongs that dig into a wooden work piece as the bolt is tightened from the opposide sideof the piece.

Self coloured finishes have no protection against corrosion, and are more suited for use in internal joinery applications. Self colour finishes have no definitive colour and can vary with the effects of natural oxidisation and weathering, from a bright zinc finish to a dark black colour. Before being used in exterior environments, they should be coated or painted with a protective covering.

• Hexagon weld nuts.
• Self colour.

• Hexagon weld nuts provide a more aesthetically pleasing finish to a standard nut.
• Stainless steel grade 304 (A2).

• Square weld nuts.
• Self colour.

• These hexagon half nuts are self colour without any corrosion resistance.
• Self colour.

• These hexagon nuts are manufactured from stainless steel grade 304 (A2) or 316 (A4) for increased corrosion resistance.
• The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.

• Full nuts.
• Brass finish.

• These hexagon nuts are galvanised for increased corrosion resistance.
• The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.

• A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
• The nylon component has a smaller inside diameter than the actual nut.
• This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
• Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
• The nuts are stainless steel grade 304 (A2) or 316 (A4) for increased resistance to corrosion.
• Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.

• A nyloc hexagon nut (type T) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
• The nylon component has a smaller inside diameter than the actual nut.
• This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
• Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
• The nuts are galvanised for increased resistance to corrosion.
• Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.

• A nyloc hexagon nut (type P) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
• The nylon component has a smaller inside diameter than the actual nut.
• Type P are slightly taller than the type T version.
• This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
• Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
• The nuts are zinc-plated for increased resistance to corrosion.
• Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.

• These hexagon nuts are bright zinc plated for increased corrosion resistance.
• The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.

• Serrated flange nuts.
• Bright zinc plated CR3+ grade 8.8 DIN6923.

• These shear nuts are galvanised.
• They provide a high security, permanent fastening, as the hexagonal part of the nut shears off at a pre-determined torque, leaving a totally tamper-proof cone.

• Wedge nuts.
• Bright zinc plated CR3+.

• Wedge nuts.
• Bright zinc plated CR3+.

• Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
• The nuts are available in stainless steel grades 304 (A2) and 316 (A4) for increased corrosion resistance.

• Wing nuts are a convenient alternative to the standard hex nut, and allow hand tightening rather than having to use spanners or other tools.
• The nuts are bright zinc plated for increased corrosion resistance.

• Channel nuts.
• Galvanised.

• Channel nuts.
• Bright zinc plated CR3+.

• Channel nuts.
• Bright zinc plated CR3+.