The HMT ImpactaMag HSS reamer is a unique double-use reamer for enlarging and aligning holes in metals and hard materials; with a specially designed cutting geometry that is designed to allow the tool to be used in an Impact wrench or a Magnet drill.
When used in an Impact wrench it is secured into a special adapter meaning the tool is easier to control, apply correct feed rate, and withdraw from the finished hole, enhancing tool life.
This reamer will also fit into a standard weldon magnet drill arbor, providing a versatile 2 in 1 solution for circumstances where it may be more appropriate to use a magnet drill.
Ideal for steel erectors and bridge work. Used for Network Rail bridge refurbishment and strengthening.
Ideal for modifying and enlarging holes ready for the installation of TCB bolts and friction grip bolts.
VersaDrive Heavy Duty Impacta-DrillTaps are primarily designed to be adapted for use with a reversible Magnet Drill to drill and tap heavy plate in 1 easy operation.
However, they can also be adapted for use with an impact wrench to enlarge and tap existing holes. Due the high rotational torque generated by larger thread sizes, Heavy Duty Impacta-DrillTaps are not reccomended for use in a standard drill chuck.
Ground Flute Twist Drill Creates the perfect Tapping Hole.
Safer Tapping with Minimal Kickback; specially hardened for impact wrench use.
High Grade Tool Steel with ground flutes for high accuracy & long life.
GoldMax low friction Titanium Coating to stop heat burn out.
VersaDrive ImpactaTaps for Galvanised Bolts have an oversized thread to compensate for the increased thickness of coating found on galvanised steel fabrications or galvanised fixings.
VersaDrive ImpactaTaps perform best when adapted for use with an Impact wrench for through holes. However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench.
Fast Tapping with Minimal Kickback; Specially hardened for Impact Wrench use.
Chipbreaker action for Automatic chip clearance when Impact Tapping.
Unique Dual-Point Starting Angle for easy alignment and fast cut.
High Grade Tool Steel with Ground Flutes for high accuracy & long life.
High Strength, Non-slip Shank Design.
Galv Taps have an oversized thread to compensate for the increased thickness of coating found on galvanized steel fabrications or galvanised fixings.