Self Drilling Screws
Show:
Sort By:
- For fixing steel-to-steel
- Hexagon head
- C1022 steel case hardened
- High clamping action
- DIN 7504K
£0.00 Ex Tax: £0.00
- For fixing steel-to-timber
- Supplied with a 16mm or 19mm washer
- EPDM washer to prevent water ingress
- Hexagon head
- Gash point for quick penetration
- Sharp threads ensure a low torque and strong fixing
- High clamping action
£0.00 Ex Tax: £0.00
- For fixing steel-to-steel
- EPDM washer to prevent water ingress
- Hexagon head
- High clamping action
- DIN 7504K
£0.00 Ex Tax: £0.00
- For fixing steel-to-steel
- EPDM washer to prevent water ingress
- Hexagon head
- High clamping action
- DIN 7504K
£0.00 Ex Tax: £0.00
- Metalfix loose washers 1mm steel with a 2mm bonded EPDM backing.
£0.00 Ex Tax: £0.00
- Supplied with 19mm washer
- Hexagon head
- li>EPDM washer to prevent water ingress
£0.00 Ex Tax: £0.00
- Stainless steel self drilling screw
- Hexagon head
£0.00 Ex Tax: £0.00
- For fixing steel-to-steel
- Large head for increased clamping
- Pan head gives a flush finish
- Coarse thread for improved grip and pul out
£0.00 Ex Tax: £0.00
- For fixing timber-to-steel
- Countersunk screw to give flush finish
- Wings drill a clearance hole to prevent the timber jacking
- DIN7504P
£0.00 Ex Tax: £0.00
- For fixing timber-to-steel
- Countersunk screw to give flush finish
- Wings drill a clearance hole to prevent the timber jacking
- DIN7504P
£0.00 Ex Tax: £0.00
- For fixing timber-to-steel
- Wings drill a clearance hole to prevent the timber jacking
- Countersunk head for a flush finish
£0.00 Ex Tax: £0.00
- For use with self drilling Screws Heavy Section
- Creates a water tight seal.
- 1mm A2 stainless steel with a 2mm bonded EPDM backing
£0.00 Ex Tax: £0.00
- Reamer on shank makes a clearance to allow sheet expansion and contraction
- Supplied with washer for watertight fixing
- High clamping action
£0.00 Ex Tax: £0.00
- Reamer on shank makes a clearance to allow sheet expansion and contraction
- Supplied with washer for watertight fixing
- High clamping action
£0.00 Ex Tax: £0.00
- For fixing steel-to-steel
- Pan head gives a flush finish
- C1022 steel case hardened
- DIN 7504N
£0.00 Ex Tax: £0.00
- For securing sheets of drywall to stud work on walls and ceilings.
- Wafer head sets the screw to the correct depth without tearing plasterboard paper.
- Phillips drive.
- Bright zinc plated (BZP) finish offers resistance to corrosion.
£0.00 Ex Tax: £0.00
- Drywall screw with a bugle head, self drill and zinc plated for increased durability.
- Self drilling hardened point designed for fitting dry linings to steel framework without drilling pilot holes.
£0.00 Ex Tax: £0.00
- One piece internally threaded fastening system
- Fast overhead installation with a screwgun
- All steel
- For fixing into timber for suspending threaded rod
- Gash point for self drilling
£0.00 Ex Tax: £0.00
- A selection of drivers for use with our self drilling screws
£0.00 Ex Tax: £0.00