M2.5 Form 'A' Flat Washers Stainless Steel


M2.5  Form  'A'  Flat  Washers  Stainless  Steel
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.

Scroll down for further product information...

When out of stock, any availability times are estimates and dependent upon supplier stock. Items without a lead time have no confirmed status and may take up to 12 weeks to arrive.
ImageProduct + BrandPriceAvailabilityQty
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties or steel and corrosion resistance are required.

Fastener Specifications
Washer TypeFlat Form A
Internal Diameter2.8mm
External Diameter6mm
Thickness0.45mm
FinishStainless Steel
Washer SpecificationDIN 125A