save our number 0800 009 6949 and message us through WhatsApp


M12 Nyloc Nuts Type 'T' Galvanised Grade 10


M12  Nyloc  Nuts  Type  'T'  Galvanised  Grade  10
  • A nyloc hexagon nut (type T) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are galvanised for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.

Scroll down for further product information...

When out of stock, any availability times are estimates and dependent upon supplier stock. Items without a lead time have no confirmed status and may take up to 12 weeks to arrive.
ImageProduct + BrandPriceAvailabilityQty

M12 Nyloc Nuts Type 'T' Galvanised (Pack of 1) [Grade 10]


Product Code: M12-NN-GT

TIK Products

£0.24
Ex VAT: £0.20
116 Packs
In Stock

M12 Nyloc Nuts Type 'T' Galvanised (Pack of 100) [Grade 10]


Product Code: HX12-NN-GT

HX Fixings

£26.84
Ex VAT: £22.37
3 Days
  • A nyloc hexagon nut (type T) is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are galvanised for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.


APPLICATION:
Where a permanent fastening is required and loosening must be prevented by movement or vibration.
Can be used on most bolt products including HT Bolts, Carriage Bolts, Threaded Rod etc.

Galvanised coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Galvanise is a coating that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity.

Fastener Specifications
Nut TypeNyloc Nut
Nut Diameter12mm
Nut ThicknessP 10.37mm / T 8mm
Thread TypeMetric
Thread Pitch1.75mm
FinishGalvanised
Material GradeGrade 10
Spanner Size19mm
Nut SpecificationDIN 982 / 985