Your shopping cart is empty!
- The original threaded stud expansion bolt.
- Self heading bolt suitable for fixing to hollow-sections, tubes and applications where access is available from one side only.
- The Lindibolt uses a standard clearance hole.
£17.44 Ex Tax: £14.53
- The original threaded stud expansion bolt.
- Self heading bolt suitable for fixing to hollow-sections, tubes and applications where access is available from one side only.
- The Lindibolt uses a standard clearance hole.
£21.38 Ex Tax: £17.82
- The original threaded stud expansion bolt.
- Self heading bolt suitable for fixing to hollow-sections, tubes and applications where access is available from one side only.
- The Lindibolt uses a standard clearance hole.
£26.21 Ex Tax: £21.84
- The original threaded stud expansion bolt.
- Self heading bolt suitable for fixing to hollow-sections, tubes and applications where access is available from one side only.
- The Lindibolt uses a standard clearance hole.
£44.16 Ex Tax: £36.80
- Beam clamp with M6 or M8 tapped holes in the back face and lower jaw to accept threaded rod or cable clips.
- For parallel or tapered flanges.
- Supplied with grade 8.8 cup point setscrew.
£4.97 Ex Tax: £4.14
- Beam clamp with M6 or M8 tapped holes in the back face and lower jaw to accept threaded rod or cable clips.
- For parallel or tapered flanges.
- Supplied with grade 8.8 cup point setscrew.
£4.97 Ex Tax: £4.14
- Type A clamp allows a fast steelwork fixing connection.
- It has a recessed top to hold the bolt head captive whilst the nut is tightened.
- The skirt prevents the clamp rotating during installation.
- Suitable for flanges up to 8 degrees.
£5.12 Ex Tax: £4.27
- Type A clamp allows a fast steelwork fixing connection.
- It has a recessed top to hold the bolt head captive whilst the nut is tightened.
- The skirt prevents the clamp rotating during installation.
- Suitable for flanges up to 8 degrees.
£7.33 Ex Tax: £6.11
- Type A clamp allows a fast steelwork fixing connection.
- It has a recessed top to hold the bolt head captive whilst the nut is tightened.
- The skirt prevents the clamp rotating during installation.
- Suitable for flanges up to 8 degrees.
£5.64 Ex Tax: £4.70
- Type A clamp allows a fast steelwork fixing connection.
- It has a recessed top to hold the bolt head captive whilst the nut is tightened.
- The skirt prevents the clamp rotating during installation.
- Suitable for flanges up to 8 degrees.
£10.13 Ex Tax: £8.44
- Type A clamp allows a fast steelwork fixing connection.
- It has a recessed top to hold the bolt head captive whilst the nut is tightened.
- The skirt prevents the clamp rotating during installation.
- Suitable for flanges up to 8 degrees.
£7.80 Ex Tax: £6.50
- Type A clamp allows a fast steelwork fixing connection.
- It has a recessed top to hold the bolt head captive whilst the nut is tightened.
- The skirt prevents the clamp rotating during installation.
- Suitable for flanges up to 8 degrees.
£10.75 Ex Tax: £8.96
- Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
- It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
- Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£5.58 Ex Tax: £4.65
- Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
- It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
- Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£9.18 Ex Tax: £7.65
- Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
- It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
- Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£7.04 Ex Tax: £5.87
- Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
- It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
- Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£12.88 Ex Tax: £10.73
- Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
- It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
- Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£9.92 Ex Tax: £8.27
- Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
- It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
- Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£15.95 Ex Tax: £13.29
- Self adjusting clamp for various flange thicknesses and slopes up to 10 degrees.
- The special serrations on the tail prevent the clamp rotating during installation.
- The LS tail spans over slotted holes.
£11.69 Ex Tax: £9.74
- Self adjusting clamp for various flange thicknesses and slopes upto 15 degrees.
- The leg of the saddle prevents the clamp rotating during installation.
- The LR tail spans slotted holes.
£16.46 Ex Tax: £13.72
- Self adjusting clamp for various flange thicknesses and slopes upto 15 degrees.
- The leg of the saddle prevents the clamp rotating during installation.
- The LR tail spans slotted holes.
£24.23 Ex Tax: £20.19
- Self adjusting clamp for various flange thicknesses and slopes up to 10 degrees.
- The special serrations on the tail prevent the clamp rotating during installation.
- The LS tail spans over slotted holes.
£21.56 Ex Tax: £17.97
- Self adjusting clamp for various flange thicknesses and slopes up to 10 degrees.
- The special serrations on the tail prevent the clamp rotating during installation.
- The LS tail spans over slotted holes.
£23.22 Ex Tax: £19.35
- Self adjusting clamp for various flange thicknesses and slopes up to 10 degrees.
- The special serrations on the tail prevent the clamp rotating during installation.
- The LS tail spans over slotted holes.
£37.57 Ex Tax: £31.31
- Designed for use with Tata steel's Comflor 60 and Comflor 80.
- They are ideal for suspending cables, pipework and HVAC systems.
- They are quick and easy to install, adjustable on-site and no expensive tools are required for installation
£102.73 Ex Tax: £85.61
- Type A clamp allows a fast steelwork fixing connection.
- It has a recessed top to hold the bolt head captive whilst the nut is tightened.
- The skirt prevents the clamp rotating during installation.
- Suitable for flanges up to 8 degrees.
£5.12 Ex Tax: £4.27
- Type A clamp allows a fast steelwork fixing connection.
- It has a recessed top to hold the bolt head captive whilst the nut is tightened.
- The skirt prevents the clamp rotating during installation.
- Suitable for flanges up to 8 degrees.
£7.33 Ex Tax: £6.11
- Type A clamp allows a fast steelwork fixing connection.
- It has a recessed top to hold the bolt head captive whilst the nut is tightened.
- The skirt prevents the clamp rotating during installation.
- Suitable for flanges up to 8 degrees.
£5.64 Ex Tax: £4.70
- Type A clamp allows a fast steelwork fixing connection.
- It has a recessed top to hold the bolt head captive whilst the nut is tightened.
- The skirt prevents the clamp rotating during installation.
- Suitable for flanges up to 8 degrees.
£10.13 Ex Tax: £8.44
- Type A clamp allows a fast steelwork fixing connection.
- It has a recessed top to hold the bolt head captive whilst the nut is tightened.
- The skirt prevents the clamp rotating during installation.
- Suitable for flanges up to 8 degrees.
£7.80 Ex Tax: £6.50
- Type A clamp allows a fast steelwork fixing connection.
- It has a recessed top to hold the bolt head captive whilst the nut is tightened.
- The skirt prevents the clamp rotating during installation.
- Suitable for flanges up to 8 degrees.
£10.75 Ex Tax: £8.96
- Type A clamp allows a fast steelwork fixing connection.
- It has a recessed top to hold the bolt head captive whilst the nut is tightened.
- The skirt prevents the clamp rotating during installation.
- Suitable for flanges up to 8 degrees.
£24.48 Ex Tax: £20.40
- Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
- It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
- Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£5.58 Ex Tax: £4.65
- Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
- It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
- Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£9.18 Ex Tax: £7.65
- Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
- It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
- Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£7.04 Ex Tax: £5.87
- Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
- It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
- Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£12.88 Ex Tax: £10.73
- Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
- It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
- Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£9.92 Ex Tax: £8.27
- Type B allows a fast steelwork fixing connection without the need for onsite drilling or welding.
- It is a steelwork clamp with flat top which allows the bolt head or nut to be rotated.
- Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8 degrees.
£15.95 Ex Tax: £13.29
- Versatile clamp for steelwork fixing connections.
- Can be used to secure steel beams or rails.
- The skirt prevents the clamp rotating during installation.
- The BR tail spans slotted holes.
- Suitable for flanges up to 8 degrees.
£6.60 Ex Tax: £5.50
- Versatile clamp for steelwork fixing connections.
- Can be used to secure steel beams or rails.
- The skirt prevents the clamp rotating during installation.
- The BR tail spans slotted holes.
- Suitable for flanges up to 8 degrees.
£8.71 Ex Tax: £7.26