save our number 0800 009 6949 and message us through WhatsApp

Washers - Stainless Steel

Washers - Stainless Steel

Our range of washer products has a product for any requirement.  If you are looking for a standard round washer, please select the "Flat Washers Form A Stainless Steel" option as this is the standard flat washer suitable for most applications.


Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties or steel and corrosion resistance are required.

Show:
Sort By:
  • Used with threaded fasteners, a washer helps to distribute tightening loads.
  • Crinkle washers decrease surface loads, as well as protect against vibrations.
  • Makes loosening and tightening component parts smoother, and easier.
  • Conforms to BS 4463.
  • Offers superb resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Used with threaded fasteners, a washer helps to distribute tightening loads.
  • These washers have a diameter that is three times greater than the internal diameter.
  • Conforms to DIN 9021.
  • Offers superb resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Used with threaded fasteners, a washer helps to distribute tightening loads.
  • Table 3 light pattern.
  • Conforms to BS 4310.
  • Offers superb resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Ringlock washers provide high-quality, user-friendly bolt securing for the most demanding of applications and are ideal for repeated use.
  • The ring locking system guarantees that the two wedge lock washers are always fastened in the correct position with the wedge shaped cams on the inside and the radial teeth on the outside.
  • This means that the bolt locking system is always easy, safe and quick to install, even for non-specialist users.
  • Particularly suitable for dynamic loads – including when lubricants are used.
£0.00 Ex Tax: £0.00
  • Used with threaded fasteners, a washer helps to distribute tightening loads.
  • These washers have a diameter that is three times greater than the internal diameter.
  • Conforms to DIN 9021.
  • Offers superb resistance to corrosion.
£0.00 Ex Tax: £0.00
  • These external shakeproof washers are designed to allow a secure fastening, preventing loosening of the fastener by either movement or vibration.
  • Also known as serrated washers or star washers, they have serrations that extend radially inward and/or outward to bite into the bearing surface.
  • This type of washer is effective as a lock washer when used with a soft substrate, such as aluminium or plastic.
  • The washers are made from stainless steel grade 304 (A2) for increased corrosion resistance and conform to DIN6797 standards.
£0.00 Ex Tax: £0.00
  • These external shakeproof washers are designed to allow a secure fastening, preventing loosening of the fastener by either movement or vibration.
  • Also known as serrated washers or star washers, they have serrations that extend radially inward and/or outward to bite into the bearing surface.
  • This type of washer is effective as a lock washer when used with a soft substrate, such as aluminium or plastic.
  • The washers are made from stainless steel grade 304 (A2) for increased corrosion resistance and conform to DIN 6798A standards.
£0.00 Ex Tax: £0.00
  • These internal shakeproof washers are designed to allow a secure fastening, preventing loosening of the fastener by either movement or vibration.
  • Also known as serrated washers or star washers, they have serrations that extend radially inward and/or outward to bite into the bearing surface.
  • This type of washer is effective as a lock washer when used with a soft substrate, such as aluminium or plastic.
  • The washers are made from stainless steel grade 304 (A2) for increased corrosion resistance and conform to DIN6797 standards.
£0.00 Ex Tax: £0.00
  • These internal shakeproof washers are designed to allow a secure fastening, preventing loosening of the fastener by either movement or vibration.
  • Also known as serrated washers or star washers, they have serrations that extend radially inward and/or outward to bite into the bearing surface.
  • This type of washer is effective as a lock washer when used with a soft substrate, such as aluminium or plastic.
  • The washers are made from stainless steel grade 304 (A2) for increased corrosion resistance and conform to DIN 6798J standards.
£0.00 Ex Tax: £0.00
  • These internal shakeproof washers are designed to allow a secure fastening, preventing loosening of the fastener by either movement or vibration.
  • Also known as serrated washers or star washers, they have serrations that extend radially inward and/or outward to bite into the bearing surface.
  • This type of washer is effective as a lock washer when used with a soft substrate, such as aluminium or plastic.
  • The washers are made from stainless steel grade 304 (A2) for increased corrosion resistance and conform to DIN 6798J standards.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • These spring washers ring-shaped, split at one point and bent into a helix.
  • This shape means that the washer exerts a spring force between the fastener's head and the base item.
  • The main purpose of the spring washer is to prevent loosening of the fastener by either movement or vibration.
  • They are available with a square or rectangular section.
  • These washers are made from stainless steel 304 (A2) or 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • These spring washers ring-shaped, split at one point and bent into a helix.
  • This shape means that the washer exerts a spring force between the fastener's head and the base item.
  • The main purpose of the spring washer is to prevent loosening of the fastener by either movement or vibration.
  • They are available with a square or rectangular section.
  • These washers are made from stainless steel 304 (A2) or 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • These spring washers ring-shaped, split at one point and bent into a helix.
  • This shape means that the washer exerts a spring force between the fastener's head and the base item.
  • The main purpose of the spring washer is to prevent loosening of the fastener by either movement or vibration.
  • They are available with a square or rectangular section.
  • These washers are made from stainless steel 304 (A2) or 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form B flat washers are thinner than the heavier duty form A type washers.
  • They are made from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • These spring washers ring-shaped, split at one point and bent into a helix.
  • This shape means that the washer exerts a spring force between the fastener's head and the base item.
  • The main purpose of the spring washer is to prevent loosening of the fastener by either movement or vibration.
  • They are available with a square or rectangular section.
  • These washers are made from stainless steel 304 (A2) or 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form B flat washers are thinner than the heavier duty form A type washers.
  • They are made from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • These spring washers ring-shaped, split at one point and bent into a helix.
  • This shape means that the washer exerts a spring force between the fastener's head and the base item.
  • The main purpose of the spring washer is to prevent loosening of the fastener by either movement or vibration.
  • They are available with a square or rectangular section.
  • These washers are made from stainless steel 304 (A2) or 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form B flat washers are thinner than the heavier duty form A type washers.
  • They are made from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • The Delta Protekt washer system consists of a pair of washers with a wedge-locking action, which is a unique method that uses tension instead of friction.
  • The key is the difference in angles. Since the angle A is larger than the angle B , the pair of washers expand more than the corresponding pitch of the thread.
  • The washers positively lock the fastener in a joint which is subjected to extreme vibration or dynamic loads.
  • This unique bolt securing system uses tension to make the bolt self-locking.
£0.00 Ex Tax: £0.00
  • These spring washers ring-shaped, split at one point and bent into a helix.
  • This shape means that the washer exerts a spring force between the fastener's head and the base item.
  • The main purpose of the spring washer is to prevent loosening of the fastener by either movement or vibration.
  • They are available with a square or rectangular section.
  • These washers are made from stainless steel 304 (A2) or 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Form C flat washers.
  • They are made from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form C flat washers.
  • They are made from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Name 'Penny Washer' due to their similarity in size to an old penny.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
  • The washers are stainless steel for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Name 'Penny Washer' due to their similarity in size to an old penny.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
  • The washers are stainless steel for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • These spring washers ring-shaped, split at one point and bent into a helix.
  • This shape means that the washer exerts a spring force between the fastener's head and the base item.
  • The main purpose of the spring washer is to prevent loosening of the fastener by either movement or vibration.
  • They are available with a square or rectangular section.
  • These washers are made from stainless steel 304 (A2) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form B flat washers are thinner than the heavier duty form A type washers.
  • They are made from stainless steel grade 304 (A2) for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Form B flat washers are thinner than the heavier duty form A type washers.
  • They are made from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to BS4320 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • These spring washers ring-shaped, split at one point and bent into a helix.
  • This shape means that the washer exerts a spring force between the fastener's head and the base item.
  • The main purpose of the spring washer is to prevent loosening of the fastener by either movement or vibration.
  • They are available with a square or rectangular section.
  • These washers are made from stainless steel 304 (A2) or 316 (A4) for increased corrosion resistance.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from stainless steel grade 304 (A2) or 316 (A4) for resistance to corrosion, and conform to DIN125 standards.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00