Hardware & Fixings

Hardware & Fixings
Show:
Sort By:
  • Heavy duty flat wire 10J galvanised staples for staple guns, hammer tackers, air and electric guns.
  • Compatible with Silverline 3-in-1 Staple Gun and 20ga wide crown staplers.
  • Also compatible with Workzone WZEN20, Powerfix Profi Z16531 and all 20ga 7/16 crown staplers.
£0.00 Ex Tax: £0.00
  • Finish T-nail brads for air and gas nailers.
  • Compatible with Silverline Finish Nailers (955431 and 107244).
  • Also suitable for Tacwise DFN50V & FFN64LHH, DeWalt DC616KA, Paslode IM65 & Bostitch FN1664-e Finish nail guns.
  • Equivalent to Senco, DeWalt, Paslode,Tacwise, Bostich and Firmahold 16G brads and finish nails.
£0.00 Ex Tax: £0.00
  • Steel nail with superior holding power, featuring external bevels for a strong hold and preventing nail from backing out.
  • Ideal for use in soft wood such as MDF and plywood.
  • Approximately 110 nails per 1/2 kg.
£0.00 Ex Tax: £0.00
  • Corrosion resistant and weatherproof.
  • For internal or external use.
  • Not load rated.
£0.00 Ex Tax: £0.00
  • Swivel wheel rubber castor with non-marking tyres and brake.
£0.00 Ex Tax: £0.00
  • Polypropylene swivel castor with non-marking tyre and brake.
£0.00 Ex Tax: £0.00
  • Swivel wheel rubber castor with non-marking tyre and brake.
£0.00 Ex Tax: £0.00
  • Corrosion-resistant and weatherproof.
  • Internal or external use.
£0.00 Ex Tax: £0.00
  • Zinc-plated, corrosion-resistant and weatherproof.
  • Internal or external use.
£0.00 Ex Tax: £0.00
  • Galvanised steel clout nails used for various building and woodworking purposes.
  • Rust-resistant, making them ideal for exterior and interior use.
  • Approximately 290 nails per 1kg.
£0.00 Ex Tax: £0.00
  • Non-expansion fixing bolt fixes directly to pre-drilled masonry, hollow block, brick and concrete.
  • Quick and easy to use, this non-expansion fixing allows tight spacing and close-to-the-edge applications.
  • Screws into a pre-drilled hole, cutting its own self-tapping thread without the need for a sleeve or plug.
  • For the installation of racking, hand rails, barriers, storage systems, machinery and numerous other applications.
  • Can be used indoors or out.
£0.00 Ex Tax: £0.00
  • Zinc-plated steel corner bracket for mending and reinforcing.
  • Corrosion resistant with 4 x fixing holes.
£0.00 Ex Tax: £0.00
  • Zinc-plated steel plates for mending and reinforcing.
  • Corrosion resistant with 4 x fixing holes.
£0.00 Ex Tax: £0.00
  • Steel construction with rectangular in-section providing a strong, secure fixing in wood and pre-drilled masonry.
  • Approximately 171 nails per 1kg.
£0.00 Ex Tax: £0.00
  • Strong, galvanised wire with sharp points for excellent penetration and top performance.
  • 6mm leg length staples up to 30 sheets.
  • Suitable for Rexel, Rapid, Leitz, Novus, Esselte, Arrow, Stanley and other branded staplers.
£0.00 Ex Tax: £0.00
  • Female anchors for anchoring into concrete.
  • Use in applications requiring a flush-mounted anchor and where a bolt needs to be inserted and removed.
  • Also used to insert threaded rod to suspend electrical cable trays, HVAC ductwork and fire sprinkler pipe and heads.
  • Yellow zinc passivated.
  • For use indoors or out.
  • .Requires setting tool.
£0.00 Ex Tax: £0.00
  • Zinc plated and corrosion resistant.
  • Can be used internally or externally.
  • Not load rated.
£0.00 Ex Tax: £0.00
  • Eurohooks for use with standard pegboard with holes 25mm apart.
  • Chrome-plated steel with mirror polish.
  • Extra storage solution for home, garage, shed and workshop.
£0.00 Ex Tax: £0.00
  • Fixed wheel rubber castor with non-marking tyres.
£0.00 Ex Tax: £0.00
  • Zinc-plated and corrosion-resistant.
  • Removable pin.
  • Not load rated.
£0.00 Ex Tax: £0.00
  • Galvanised steel construction featuring large, flat retaining head for the secure fixing of soft materials such as roofing felt.
  • Rust-resistant making them versatile and hard-wearing.
  • Approximately 1010 nails per 1kg.
£0.00 Ex Tax: £0.00
  • Versatile, strong strapping made from galvanised steel.
  • Easy to bend or twist to fit many industrial and DIY applications.
  • Pre-perforated fix using nails, bolts or screws.
  • Can be cut, bent and formed for types of light fixing applications.
  • Use for securing, supporting and strapping of cable, trunking and ducting.
  • Not recommended for structural applications.
£0.00 Ex Tax: £0.00
  • Paper collated framing nails with 34 degree clipped head.
  • Yellow passivated for weather resistance.
  • Annular ring shank D head nails resist pull out.
  • Ideal for first fix timber-to-timber applications.
  • Equivalent to Makita, DeWalt, Tacwise, and Firmahold 34 paper collated strip nails.
£0.00 Ex Tax: £0.00
  • Made from rust-resistant galvanised steel.
  • U-shaped for superior hold and featuring sharp, tapered ends for the effective securing of wire lengths.
£0.00 Ex Tax: £0.00
  • Type 17 super-sharp screws with reduced pre-drilling requirement.
  • Self-countersinking cutting nibs with flat head for clean finish.
  • Deep, sharp serrated threads cut through fibrous material, reducing torque required to drive the screw.
  • Next generation lubrication system requires almost half the torque to drive over conventional screws.
  • Knurled shank ribs reduce further the installation torque required.
£0.00 Ex Tax: £0.00
  • Anchor for hollow base materials featuring a demountable screw.
  • Pre-assembled cavity fixing with flush finish and wide flange.
  • Locks into base material, allowing removal and refitting of fixtures.
  • Anti-rotation barbs prevent anchor from spinning in the hole.
  • A setting tool should be used to ensure the legs collapse fully, spreading the load over a wide area.
£0.00 Ex Tax: £0.00
  • Multi-use, high quality nylon hook-and-loop cable ties.
  • Includes eyelets for feeding onto cable.
  • 25mm width.
  • Ideal for securing cables, ropes, hoses, computer and audio cable.
  • For use around the home, garden and workplace.
£0.00 Ex Tax: £0.00
  • Self-adhesive hook and loop fastening system includes one roll of hook and one roll of loop in 100% nylon.
  • Hundreds of uses around the home, including decorating, DIY, crafts and office projects.
£0.00 Ex Tax: £0.00
  • Self-adhesive hook and loop fastening system includes one roll of hook and one roll of loop in 100% nylon.
  • Hundreds of uses around the home, including decorating, DIY, crafts and office projects.
£0.00 Ex Tax: £0.00
  • Ideal fixing for flexible rubber hose, plastic hose and flexible pipes. Used in gardens, workshops and garages where an air or water-tight seal is required. Slotted 1/4in hex drive.
£0.00 Ex Tax: £0.00
  • Heavy-duty cast-zinc construction with satin nickel finish.
  • High-quality torsion-specific system.
  • Allows any size lid to open smoothly, hold its position and easily close.
  • Unique torsion mechanism holds lid in any position.
  • Suitable for overlay and flush-fitting lids.
  • Includes screws.
  • Fits 19mm (3/4") thick stock.
£0.00 Ex Tax: £0.00
  • Light duty swivel castors with non-marking tyres.
£0.00 Ex Tax: £0.00
  • Ideal for supporting light to medium weight shelving.
  • Does not require shelving rack.
  • Enables shelves to be fitted in confined areas.
  • Paintable to match decor.
  • Support larger shelves and heavier loads with an increased number of brackets.
£0.00 Ex Tax: £0.00
  • Steel nails.
  • Stronger than oval wire nails, these nails can be easily punched below the wood surface.
  • Less likely to split the wood if driven in with the longer sides parallel to the grain.
  • Suitable for joinery work where appearance is a priority.
  • Approximately 360 nails per 1kg.
£0.00 Ex Tax: £0.00
  • Hardened steel.
  • Fixes wood to brick, breeze block and most types of masonry.
£0.00 Ex Tax: £0.00
  • Heavy duty, yellow passivated expansion anchor with 4-way expansion shield for secure fixing.
  • Torque-controlled for installation of racking, hand rails, barriers, storage systems, machinery and numerous other applications.
  • For fixing into masonry and concrete, indoors and out.
  • Supplied with shield, washer and bolt.
£0.00 Ex Tax: £0.00
  • Four-way expansion shield for secure fixing into masonry and concrete.
  • For use indoors and out.
  • Must not be used for safety harness applications or for lifting where shock load could be applied.
  • Supplied with shield, washer and hex nut.
£0.00 Ex Tax: £0.00
  • Torque-controlled expansion anchor for installation of racking, hand rails, barriers, storage systems, machinery and numerous other applications.
  • Heavy duty yellow passivated anchor bolt fixing with four-way expansion shield for secure fixing.
  • Designed for fixing into masonry and concrete.
  • Ideal for internal and external applications.
  • Includes shield, stud and nut.
£0.00 Ex Tax: £0.00
  • Zinc-plated steel mending plates with offset fixing holes to prevent timber splitting.
  • Suitable for reinforcing flat surface joints, fencing, or timber repairs.
  • Interior or exterior use.
  • Requires screws.
£0.00 Ex Tax: £0.00
  • Aluminium mechanical fastener with steel mandrel.
  • Install into punched or pre-drilled holes suitable for all blind/pop riveting applications.
  • Select grip based on combined thickness of material to be riveted.
  • Suitable for fastening metals, wood and plastic.
£0.00 Ex Tax: £0.00