save our number 0800 009 6949 and message us through WhatsApp

TIK Products

Show:
Sort By:
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£6.74 Ex Tax: £5.62
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£5.41 Ex Tax: £4.51
  • Roofing bolts can be used on many DIY projects other than roofing.
  • These double slotted roofing bolts have a low profile mushroom head.
  • Their bright zinc plated finish increases resistance to corrosion.
  • The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
  • These are supplied with hex nuts.
£10.01 Ex Tax: £8.34
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£5.70 Ex Tax: £4.75
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£9.04 Ex Tax: £7.53
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£4.76 Ex Tax: £3.97
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Bright zinc plated for protection against corrosion.
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£6.83 Ex Tax: £5.69
  • Roofing bolts can be used on many DIY projects other than roofing.
  • These double slotted roofing bolts have a low profile mushroom head.
  • Their bright zinc plated finish increases resistance to corrosion.
  • The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
  • These are supplied with hex nuts.
£10.01 Ex Tax: £8.34
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£3.28 Ex Tax: £2.73
  • These set screws are made from grade 8.8 steel.
  • Galvanised for increased resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£3.64 Ex Tax: £3.03
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£3.34 Ex Tax: £2.78
  • Set screws.
  • Brass DIN933.
  • Nuts and washers are available seperately.
£12.67 Ex Tax: £10.56
  • Roofing bolts can be used on many DIY projects other than roofing.
  • These double slotted roofing bolts have a low profile mushroom head.
  • Their bright zinc plated finish increases resistance to corrosion.
  • The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
  • These are supplied with hex nuts.
£3.56 Ex Tax: £2.97
  • These single thread coach screws are galvanised for increased corrosion resistance.
  • The threaded section is approximately two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£10.27 Ex Tax: £8.56
  • Folded eye bolts.
  • Bright zinc plated CR3+.
  • These are supplied with hex nuts and flat washers to suit.
£19.32 Ex Tax: £16.10
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£5.23 Ex Tax: £4.36
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Bright zinc plated for protection against corrosion.
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£10.54 Ex Tax: £8.78
  • Roofing bolts can be used on many DIY projects other than roofing.
  • These double slotted roofing bolts have a low profile mushroom head.
  • Their bright zinc plated finish increases resistance to corrosion.
  • The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
  • These are supplied with hex nuts.
£10.09 Ex Tax: £8.41
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£6.01 Ex Tax: £5.01
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£3.48 Ex Tax: £2.90
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£3.46 Ex Tax: £2.88
  • These set screws are made from grade 8.8 steel.
  • Galvanised for increased resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£3.83 Ex Tax: £3.19
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£3.72 Ex Tax: £3.10
  • Set screws.
  • Brass DIN933.
  • Nuts and washers are available seperately.
£13.16 Ex Tax: £10.97
  • These single thread coach screws are galvanised for increased corrosion resistance.
  • The threaded section is approximately two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£11.23 Ex Tax: £9.36
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£6.18 Ex Tax: £5.15
  • Folded eye bolts.
  • Bright zinc plated CR3+.
  • These are supplied with hex nuts and flat washers to suit.
£22.66 Ex Tax: £18.88
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£3.67 Ex Tax: £3.06
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£3.61 Ex Tax: £3.01
  • These set screws are made from grade 8.8 steel.
  • Galvanised for increased resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£4.67 Ex Tax: £3.89
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£4.75 Ex Tax: £3.96
  • Name 'Penny Washer' due to their similarity in size to an old penny.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
  • The washers are stainless steel for increased corrosion resistance.
£0.12 Ex Tax: £0.10
  • These single thread coach screws are galvanised for increased corrosion resistance.
  • The threaded section is approximately two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£3.54 Ex Tax: £2.95
  • These single thread coach screws are zinc plated for increased corrosion resistance.
  • The threaded section is approximated two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£4.10 Ex Tax: £3.42
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£5.48 Ex Tax: £4.57
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£3.90 Ex Tax: £3.25
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Galvanised for increased protection against corrosion
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
  • For box quantities, please check the number in brackets in the listing title.
£4.07 Ex Tax: £3.39
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Bright zinc plated for protection against corrosion.
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£3.72 Ex Tax: £3.10
  • These set screws are made from grade 8.8 steel.
  • Galvanised for increased resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£3.46 Ex Tax: £2.88
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£4.21 Ex Tax: £3.51