save our number 0800 009 6949 and message us through WhatsApp

TIK Products

Show:
Sort By:
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Bright zinc plated for protection against corrosion.
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£15.32 Ex Tax: £12.77
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£5.75 Ex Tax: £4.79
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£5.70 Ex Tax: £4.75
  • These set screws are made from grade 8.8 steel.
  • Galvanised for increased resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£3.90 Ex Tax: £3.25
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£3.85 Ex Tax: £3.21
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£26.34 Ex Tax: £21.95
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£20.69 Ex Tax: £17.24
  • These single thread coach screws are zinc plated for increased corrosion resistance.
  • The threaded section is approximated two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£4.01 Ex Tax: £3.34
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£5.78 Ex Tax: £4.82
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£4.85 Ex Tax: £4.04
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Galvanised for increased protection against corrosion
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
  • For box quantities, please check the number in brackets in the listing title.
£4.86 Ex Tax: £4.05
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Bright zinc plated for protection against corrosion.
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£4.56 Ex Tax: £3.80
  • These set screws are made from grade 8.8 steel.
  • Galvanised for increased resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£4.38 Ex Tax: £3.65
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£4.14 Ex Tax: £3.45
  • Set screws.
  • Brass DIN933.
  • Nuts and washers are available seperately.
£21.95 Ex Tax: £18.29
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£31.30 Ex Tax: £26.08
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£21.25 Ex Tax: £17.71
  • These plate washers have a larger surface area than most round washers, making them suitable for heavy-duty fastening.
  • They are ideal for use with Carriage Bolts in structural timber fastening applications such as joist work and decking.
  • The washers are bright zinc plated for increased resistance to corrosion.
£3.64 Ex Tax: £3.03
  • These plate washers have a larger surface area than most round washers, making them suitable for heavy-duty fastening.
  • They are ideal for use with Carriage Bolts in structural timber fastening applications such as joist work and decking.
  • The washers are galvanised for increased resistance to corrosion.
£4.16 Ex Tax: £3.47
  • These plate washers have a larger surface area than most round washers, making them suitable for heavy-duty fastening.
  • They are ideal for use with Carriage Bolts in structural timber fastening applications such as joist work and decking.
  • The washers are bright zinc plated for increased resistance to corrosion.
£3.59 Ex Tax: £2.99
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Bright zinc plated for protection against corrosion.
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£4.96 Ex Tax: £4.13
  • These set screws are made from grade 8.8 steel.
  • Galvanised for increased resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£4.51 Ex Tax: £3.76
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£4.40 Ex Tax: £3.67
  • These single thread coach screws are zinc plated for increased corrosion resistance.
  • The threaded section is approximated two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£2.41 Ex Tax: £2.01
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£5.58 Ex Tax: £4.65
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£5.02 Ex Tax: £4.18
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Galvanised for increased protection against corrosion
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
  • For box quantities, please check the number in brackets in the listing title.
£5.54 Ex Tax: £4.62
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Bright zinc plated for protection against corrosion.
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£5.35 Ex Tax: £4.46
  • These set screws are made from grade 8.8 steel.
  • Galvanised for increased resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£5.20 Ex Tax: £4.33
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£4.67 Ex Tax: £3.89
  • Set screws.
  • Brass DIN933.
  • Nuts and washers are available seperately.
£26.92 Ex Tax: £22.43
  • These plate washers have a larger surface area than most round washers, making them suitable for heavy-duty fastening.
  • They are ideal for use with Carriage Bolts in structural timber fastening applications such as joist work and decking.
  • The washers are galvanised for increased resistance to corrosion.
£4.62 Ex Tax: £3.85
  • These plate washers have a larger surface area than most round washers, making them suitable for heavy-duty fastening.
  • They are ideal for use with Carriage Bolts in structural timber fastening applications such as joist work and decking.
  • The washers are bright zinc plated for increased resistance to corrosion.
£3.94 Ex Tax: £3.28
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Bright zinc plated for protection against corrosion.
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£5.72 Ex Tax: £4.77
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£4.99 Ex Tax: £4.16
  • These single thread coach screws are zinc plated for increased corrosion resistance.
  • The threaded section is approximated two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£4.91 Ex Tax: £4.09
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£6.38 Ex Tax: £5.32
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£5.11 Ex Tax: £4.26
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Galvanised for increased protection against corrosion
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
  • For box quantities, please check the number in brackets in the listing title.
£4.97 Ex Tax: £4.14
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Bright zinc plated for protection against corrosion.
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£4.82 Ex Tax: £4.02