save our number 0800 009 6949 and message us through WhatsApp

Socket Cap Screws - Stainless Steel

Socket Cap Screws - Stainless Steel

Socket caps have a small cylindrical head with tall vertical sides. They have a drive which is a six-sided recess for use with a hex key.

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties or steel and corrosion resistance are required.

Show:
Sort By:
  • These hex head set screws are made from 304 (A2) grade stainless steel.
  • Provides protection against corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) or 316 (A4) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00