Please note that the items with a 3 day delivery are not stock items and lead times may vary due to on-going logistics issues around the UK.
We can confirm the lead times of products by calling our sales team on 0800 009 6949, using live chat when available or emailing sales@fixingsmegastore.co.uk.

Hardware & Fixings

Hardware & Fixings
Show:
Sort By:
  • Heavy duty flat wire 10J galvanised staples for staple guns, hammer tackers, air and electric guns.
  • Compatible with Silverline 3-in-1 Staple Gun and 20ga wide crown staplers.
  • Also compatible with Workzone WZEN20, Powerfix Profi Z16531 and all 20ga 7/16 crown staplers.
£0.00 Ex Tax: £0.00
  • Finish T-nail brads for air and gas nailers.
  • Compatible with Silverline Finish Nailers (955431 and 107244).
  • Also suitable for Tacwise DFN50V & FFN64LHH, DeWalt DC616KA, Paslode IM65 & Bostitch FN1664-e Finish nail guns.
  • Equivalent to Senco, DeWalt, Paslode,Tacwise, Bostich and Firmahold 16G brads and finish nails.
£0.00 Ex Tax: £0.00
  • Steel nail with superior holding power, featuring external bevels for a strong hold and preventing nail from backing out.
  • Ideal for use in soft wood such as MDF and plywood.
  • Approximately 110 nails per 1/2 kg.
£0.00 Ex Tax: £0.00
  • Corrosion resistant and weatherproof.
  • For internal or external use.
  • Not load rated.
£0.00 Ex Tax: £0.00
  • Swivel wheel rubber castor with non-marking tyres and brake.
£0.00 Ex Tax: £0.00
  • Polypropylene swivel castor with non-marking tyre and brake.
£0.00 Ex Tax: £0.00
  • Swivel wheel rubber castor with non-marking tyre and brake.
£0.00 Ex Tax: £0.00
  • Corrosion-resistant and weatherproof.
  • Internal or external use.
£0.00 Ex Tax: £0.00
  • Zinc-plated, corrosion-resistant and weatherproof.
  • Internal or external use.
£0.00 Ex Tax: £0.00
  • Galvanised steel clout nails used for various building and woodworking purposes.
  • Rust-resistant, making them ideal for exterior and interior use.
  • Approximately 290 nails per 1kg.
£0.00 Ex Tax: £0.00
  • Non-expansion fixing bolt fixes directly to pre-drilled masonry, hollow block, brick and concrete.
  • Quick and easy to use, this non-expansion fixing allows tight spacing and close-to-the-edge applications.
  • Screws into a pre-drilled hole, cutting its own self-tapping thread without the need for a sleeve or plug.
  • For the installation of racking, hand rails, barriers, storage systems, machinery and numerous other applications.
  • Can be used indoors or out.
£0.00 Ex Tax: £0.00
  • Zinc-plated steel corner bracket for mending and reinforcing.
  • Corrosion resistant with 4 x fixing holes.
£0.00 Ex Tax: £0.00
  • Zinc-plated steel plates for mending and reinforcing.
  • Corrosion resistant with 4 x fixing holes.
£0.00 Ex Tax: £0.00
  • Steel construction with rectangular in-section providing a strong, secure fixing in wood and pre-drilled masonry.
  • Approximately 171 nails per 1kg.
£0.00 Ex Tax: £0.00
  • Strong, galvanised wire with sharp points for excellent penetration and top performance.
  • 6mm leg length staples up to 30 sheets.
  • Suitable for Rexel, Rapid, Leitz, Novus, Esselte, Arrow, Stanley and other branded staplers.
£0.00 Ex Tax: £0.00
  • Female anchors for anchoring into concrete.
  • Use in applications requiring a flush-mounted anchor and where a bolt needs to be inserted and removed.
  • Also used to insert threaded rod to suspend electrical cable trays, HVAC ductwork and fire sprinkler pipe and heads.
  • Yellow zinc passivated.
  • For use indoors or out.
  • .Requires setting tool.
£0.00 Ex Tax: £0.00
  • Zinc plated and corrosion resistant.
  • Can be used internally or externally.
  • Not load rated.
£0.00 Ex Tax: £0.00
  • Eurohooks for use with standard pegboard with holes 25mm apart.
  • Chrome-plated steel with mirror polish.
  • Extra storage solution for home, garage, shed and workshop.
£0.00 Ex Tax: £0.00
  • Fixed wheel rubber castor with non-marking tyres.
£0.00 Ex Tax: £0.00
  • Zinc-plated and corrosion-resistant.
  • Removable pin.
  • Not load rated.
£0.00 Ex Tax: £0.00
  • Galvanised steel construction featuring large, flat retaining head for the secure fixing of soft materials such as roofing felt.
  • Rust-resistant making them versatile and hard-wearing.
  • Approximately 1010 nails per 1kg.
£0.00 Ex Tax: £0.00
  • Versatile, strong strapping made from galvanised steel.
  • Easy to bend or twist to fit many industrial and DIY applications.
  • Pre-perforated fix using nails, bolts or screws.
  • Can be cut, bent and formed for types of light fixing applications.
  • Use for securing, supporting and strapping of cable, trunking and ducting.
  • Not recommended for structural applications.
£0.00 Ex Tax: £0.00
  • Paper collated framing nails with 34 degree clipped head.
  • Yellow passivated for weather resistance.
  • Annular ring shank D head nails resist pull out.
  • Ideal for first fix timber-to-timber applications.
  • Equivalent to Makita, DeWalt, Tacwise, and Firmahold 34 paper collated strip nails.
£0.00 Ex Tax: £0.00
  • Made from rust-resistant galvanised steel.
  • U-shaped for superior hold and featuring sharp, tapered ends for the effective securing of wire lengths.
£0.00 Ex Tax: £0.00
  • Type 17 super-sharp screws with reduced pre-drilling requirement.
  • Self-countersinking cutting nibs with flat head for clean finish.
  • Deep, sharp serrated threads cut through fibrous material, reducing torque required to drive the screw.
  • Next generation lubrication system requires almost half the torque to drive over conventional screws.
  • Knurled shank ribs reduce further the installation torque required.
£0.00 Ex Tax: £0.00
  • Anchor for hollow base materials featuring a demountable screw.
  • Pre-assembled cavity fixing with flush finish and wide flange.
  • Locks into base material, allowing removal and refitting of fixtures.
  • Anti-rotation barbs prevent anchor from spinning in the hole.
  • A setting tool should be used to ensure the legs collapse fully, spreading the load over a wide area.
£0.00 Ex Tax: £0.00
  • Multi-use, high quality nylon hook-and-loop cable ties.
  • Includes eyelets for feeding onto cable.
  • 25mm width.
  • Ideal for securing cables, ropes, hoses, computer and audio cable.
  • For use around the home, garden and workplace.
£0.00 Ex Tax: £0.00
  • Self-adhesive hook and loop fastening system includes one roll of hook and one roll of loop in 100% nylon.
  • Hundreds of uses around the home, including decorating, DIY, crafts and office projects.
£0.00 Ex Tax: £0.00
  • Self-adhesive hook and loop fastening system includes one roll of hook and one roll of loop in 100% nylon.
  • Hundreds of uses around the home, including decorating, DIY, crafts and office projects.
£0.00 Ex Tax: £0.00
  • Ideal fixing for flexible rubber hose, plastic hose and flexible pipes. Used in gardens, workshops and garages where an air or water-tight seal is required. Slotted 1/4in hex drive.
£0.00 Ex Tax: £0.00
  • Heavy-duty cast-zinc construction with satin nickel finish.
  • High-quality torsion-specific system.
  • Allows any size lid to open smoothly, hold its position and easily close.
  • Unique torsion mechanism holds lid in any position.
  • Suitable for overlay and flush-fitting lids.
  • Includes screws.
  • Fits 19mm (3/4") thick stock.
£0.00 Ex Tax: £0.00
  • Light duty swivel castors with non-marking tyres.
£0.00 Ex Tax: £0.00
  • Ideal for supporting light to medium weight shelving.
  • Does not require shelving rack.
  • Enables shelves to be fitted in confined areas.
  • Paintable to match decor.
  • Support larger shelves and heavier loads with an increased number of brackets.
£0.00 Ex Tax: £0.00
  • Steel nails.
  • Stronger than oval wire nails, these nails can be easily punched below the wood surface.
  • Less likely to split the wood if driven in with the longer sides parallel to the grain.
  • Suitable for joinery work where appearance is a priority.
  • Approximately 360 nails per 1kg.
£0.00 Ex Tax: £0.00
  • Hardened steel.
  • Fixes wood to brick, breeze block and most types of masonry.
£0.00 Ex Tax: £0.00
  • Heavy duty, yellow passivated expansion anchor with 4-way expansion shield for secure fixing.
  • Torque-controlled for installation of racking, hand rails, barriers, storage systems, machinery and numerous other applications.
  • For fixing into masonry and concrete, indoors and out.
  • Supplied with shield, washer and bolt.
£0.00 Ex Tax: £0.00
  • Four-way expansion shield for secure fixing into masonry and concrete.
  • For use indoors and out.
  • Must not be used for safety harness applications or for lifting where shock load could be applied.
  • Supplied with shield, washer and hex nut.
£0.00 Ex Tax: £0.00
  • Torque-controlled expansion anchor for installation of racking, hand rails, barriers, storage systems, machinery and numerous other applications.
  • Heavy duty yellow passivated anchor bolt fixing with four-way expansion shield for secure fixing.
  • Designed for fixing into masonry and concrete.
  • Ideal for internal and external applications.
  • Includes shield, stud and nut.
£0.00 Ex Tax: £0.00
  • Zinc-plated steel mending plates with offset fixing holes to prevent timber splitting.
  • Suitable for reinforcing flat surface joints, fencing, or timber repairs.
  • Interior or exterior use.
  • Requires screws.
£0.00 Ex Tax: £0.00
  • Aluminium mechanical fastener with steel mandrel.
  • Install into punched or pre-drilled holes suitable for all blind/pop riveting applications.
  • Select grip based on combined thickness of material to be riveted.
  • Suitable for fastening metals, wood and plastic.
£0.00 Ex Tax: £0.00