save our number 0800 009 6949 and message us through WhatsApp

Self Drilling Screws

Self Drilling Screws
Show:
Sort By:
  • For fixing steel-to-steel
  • Hexagon head
  • C1022 steel case hardened
  • High clamping action
  • DIN 7504K
£0.00 Ex Tax: £0.00
  • For fixing steel-to-timber
  • Supplied with a 16mm or 19mm washer
  • EPDM washer to prevent water ingress
  • Hexagon head
  • Gash point for quick penetration
  • Sharp threads ensure a low torque and strong fixing
  • High clamping action
£0.00 Ex Tax: £0.00
  • For joining two thin sheets of steel
  • EPDM washer to prevent water ingress
  • Hexagon head
  • Supplied with 16mm or 19mm washer
  • DIN 7504K
  • Larger diameter to give better grip in steel
£0.00 Ex Tax: £0.00
  • For fixing steel-to-steel
  • EPDM washer to prevent water ingress
  • Hexagon head
  • High clamping action
  • DIN 7504K
£0.00 Ex Tax: £0.00
  • For fixing steel-to-steel
  • EPDM washer to prevent water ingress
  • Hexagon head
  • High clamping action
  • DIN 7504K
£0.00 Ex Tax: £0.00
  • Metalfix loose washers 1mm steel with a 2mm bonded EPDM backing.
£0.00 Ex Tax: £0.00
  • Supplied with 19mm washer
  • Hexagon head
  • li>EPDM washer to prevent water ingress
£0.00 Ex Tax: £0.00
  • For fixing steel-to-steel
  • Large head for increased clamping
  • Pan head gives a flush finish
  • Coarse thread for improved grip and pul out
£0.00 Ex Tax: £0.00
  • For fixing timber-to-steel
  • Countersunk screw to give flush finish
  • Wings drill a clearance hole to prevent the timber jacking
  • DIN7504P
£0.00 Ex Tax: £0.00
  • For fixing timber-to-steel
  • Countersunk screw to give flush finish
  • Wings drill a clearance hole to prevent the timber jacking
  • DIN7504P
£0.00 Ex Tax: £0.00
  • For fixing timber-to-steel
  • Wings drill a clearance hole to prevent the timber jacking
  • Countersunk head for a flush finish
£0.00 Ex Tax: £0.00
  • For use with self drilling Screws Heavy Section
  • Creates a water tight seal.
  • 1mm A2 stainless steel with a 2mm bonded EPDM backing
£0.00 Ex Tax: £0.00
  • Reamer on shank makes a clearance to allow sheet expansion and contraction
  • Supplied with washer for watertight fixing
  • High clamping action
£0.00 Ex Tax: £0.00
  • Reamer on shank makes a clearance to allow sheet expansion and contraction
  • Supplied with washer for watertight fixing
  • High clamping action
£0.00 Ex Tax: £0.00
  • For fixing steel-to-steel
  • Pan head gives a flush finish
  • C1022 steel case hardened
  • DIN 7504N
£0.00 Ex Tax: £0.00
  • For securing sheets of drywall to stud work on walls and ceilings.
  • Wafer head sets the screw to the correct depth without tearing plasterboard paper.
  • Phillips drive.
  • Bright zinc plated (BZP) finish offers resistance to corrosion.
    £0.00 Ex Tax: £0.00
    • Drywall screw with a bugle head, self drill and zinc plated for increased durability.
    • Self drilling hardened point designed for fitting dry linings to steel framework without drilling pilot holes.
    £0.00 Ex Tax: £0.00
    • One piece internally threaded fastening system
    • Fast overhead installation with a screwgun
    • All steel
    • For fixing into timber for suspending threaded rod
    • Gash point for self drilling
    £0.00 Ex Tax: £0.00
    • A selection of drivers for use with our self drilling screws
    £0.00 Ex Tax: £0.00