OO Paslode Nail Fuel Packs IM350 Hot Dipped Galv


Paslode Nail Fuel Packs IM350 Hot Dipped Galv


Paslode  Nail  Fuel  Packs  IM350  Hot  Dipped  Galv
  • Paslode IM350Plus Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.
  • FINISH:
  • All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.
  • Bright : Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.
  • Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15m.
  • Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7m.
  • Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50m
  • Stainless Steel: Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.

  • Scroll down for further product information...

    When out of stock, any availability times are estimates and dependent upon supplier stock. Items without a lead time have no confirmed status and may take up to 12 weeks to arrive.

    Next day delivery is available on items marked with a *.


    ImageProduct + Brand PriceAvailabilityQty

    Paslode 3.1mm x 63mm IM350 Full Ring Shank Hot Dipped Galv Nails


    Part No: PAS141222

    Paslode

    £112.20
    Excl VAT: £93.50
    3 Days

    Paslode IM350 Plus Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.

    FINISH:

    All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.

    Bright : Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1(indoor) Specification - No coating.

    Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2(indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.

    Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2(indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.

    Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3(indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm

    Stainless Steel: Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3(indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.

    SHANK:

    Smooth Shank : The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.

    Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.

    Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI(Rings Per Inch) vary from 16 to 32 depending on Specification.

    HEAD TYPES :

    Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5

    Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5