Quick Add To Cart

Enter Item Number:


3 Days M8 Nyloc Nuts Type 'T' Galvanised (Pack of 500) [Grade 10]

M8 Nyloc Nuts Type 'T' Galvanised (Pack of 500) [Grade 10]

Brand HX Fixings
Part No: HX08-NN-GT
Availability: 3 Days
£35.92 Excl VAT: £29.93
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are galvanised for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.

Where a permanent fastening is required and loosening must be prevented by movement or vibration.
Can be used on most bolt products including HT Bolts, Carriage Bolts, Threaded Rod etc.

Galvanised coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Galvanising is a plating that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The galvanising, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

Fastener Specifications
Nut TypeNyloc Type T
Nut Diameter8mm
Nut Thickness5.5mm
Thread TypeMetric
Thread Pitch1.25mm
FinishZinc Plated
Material GradeGrade 10
Spanner Size13mm
Nut SpecificationDIN 985