Your shopping cart is empty!
- Name 'Penny Washer' due to their similarity in size to an old penny.
- Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
- The main purpose of a washer is to distribute the load under a bolt head or the nut face.
- The washers are bright zinc plated for increased corrosion resistance.
£73.68 Ex Tax: £61.40
- Name 'Penny Washer' due to their similarity in size to an old penny.
- Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
- The main purpose of a washer is to distribute the load under a bolt head or the nut face.
- The washers are galvanised for increased corrosion resistance.
£3.22 Ex Tax: £2.68
- Name 'Penny Washer' due to their similarity in size to an old penny.
- Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
- The main purpose of a washer is to distribute the load under a bolt head or the nut face.
- The washers are bright zinc plated for increased corrosion resistance.
£1.45 Ex Tax: £1.21
- Name 'Penny Washer' due to their similarity in size to an old penny.
- Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
- The main purpose of a washer is to distribute the load under a bolt head or the nut face.
- The washers are bright zinc plated for increased corrosion resistance.
£5.46 Ex Tax: £4.55
- Name 'Penny Washer' due to their similarity in size to an old penny.
- Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
- The main purpose of a washer is to distribute the load under a bolt head or the nut face.
- The washers are bright zinc plated for increased corrosion resistance.
£83.21 Ex Tax: £69.34
- Name 'Penny Washer' due to their similarity in size to an old penny.
- Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
- The main purpose of a washer is to distribute the load under a bolt head or the nut face.
- The washers are bright zinc plated for increased corrosion resistance.
£56.23 Ex Tax: £46.86
- Name 'Penny Washer' due to their similarity in size to an old penny.
- Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
- The main purpose of a washer is to distribute the load under a bolt head or the nut face.
- The washers are bright zinc plated for increased corrosion resistance.
£2.03 Ex Tax: £1.69
- Name 'Penny Washer' due to their similarity in size to an old penny.
- Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
- The main purpose of a washer is to distribute the load under a bolt head or the nut face.
- The washers are bright zinc plated for increased corrosion resistance.
£6.30 Ex Tax: £5.25
- Name 'Penny Washer' due to their similarity in size to an old penny.
- Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
- The main purpose of a washer is to distribute the load under a bolt head or the nut face.
- The washers are bright zinc plated for increased corrosion resistance.
£2.68 Ex Tax: £2.23
- Name 'Penny Washer' due to their similarity in size to an old penny.
- Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
- The main purpose of a washer is to distribute the load under a bolt head or the nut face.
- The washers are bright zinc plated for increased corrosion resistance.
£9.12 Ex Tax: £7.60
- Name 'Penny Washer' due to their similarity in size to an old penny.
- Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
- The main purpose of a washer is to distribute the load under a bolt head or the nut face.
- The washers are bright zinc plated for increased corrosion resistance.
£72.00 Ex Tax: £60.00
![M10x100 Coach Screws Galvanised [Incl. Washers] (Pack of 10)](https://www.fixingsmegastore.co.uk/image/cache/data/Fixings/Screws/coach-screw-galv-500x500.jpg "M10x100 Coach Screws Galvanised [Incl. Washers] (Pack of 10)")
- These single thread coach screws are galvanised for increased corrosion resistance.
- The threaded section is approximately two thirds of the total length.
- Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
- These coach screws conform to DIN571 standards.
£4.93 Ex Tax: £4.11
![M10x100 Coach Screws Zinc Plated [Incl. Washers] (Pack of 10)](https://www.fixingsmegastore.co.uk/image/cache/data/Fixings/Screws/coach-screw-bzp-500x500.jpg "M10x100 Coach Screws Zinc Plated [Incl. Washers] (Pack of 10)")
- These single thread coach screws are zinc plated for increased corrosion resistance.
- The threaded section is approximated two thirds of the total length.
- Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
- These coach screws conform to DIN571 standards.
£4.62 Ex Tax: £3.85
![M10x100 Cup Square Hex Coach Bolts Galvanised [Incl. Nuts & Washers] (Pack of 10)](https://www.fixingsmegastore.co.uk/image/cache/data/Fixings/Bolts/coach-bolt-no-nut-galv-500x500.jpg "M10x100 Cup Square Hex Coach Bolts Galvanised [Incl. Nuts & Washers] (Pack of 10)")
- These coach bolts are galvanised, and ideal for timber to timber joining. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
- M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£5.57 Ex Tax: £4.64
![M10x100 Cup Square Hex Coach Bolts Zinc Plated [Incl. Nuts & Washers] (Pack of 10)](https://www.fixingsmegastore.co.uk/image/cache/data/Fixings/Bolts/coach-bolt-bzp-500x500.jpg "M10x100 Cup Square Hex Coach Bolts Zinc Plated [Incl. Nuts & Washers] (Pack of 10)")
- These coach bolts are zinc plated, and ideal for timber to timber joining. They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
- Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
- Conforms to DIN603 and DIN934 standards.
- Available in a comprehensive range of sizes to suit most applications.
£4.70 Ex Tax: £3.92
- These single thread coach screws are zinc plated for increased corrosion resistance.
- The threaded section is approximated two thirds of the total length.
- Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
- These coach screws conform to DIN571 standards.
£3.41 Ex Tax: £2.84
- These coach bolts are galvanised, and ideal for timber to timber joining. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
- M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£3.94 Ex Tax: £3.28
![M10x110 Cup Square Hex Coach Bolts Zinc Plated [Incl. Nuts & Washers] (Pack of 5)](https://www.fixingsmegastore.co.uk/image/cache/data/Fixings/Bolts/coach-bolt-shank-bzp-500x500.jpg "M10x110 Cup Square Hex Coach Bolts Zinc Plated [Incl. Nuts & Washers] (Pack of 5)")
- These coach bolts are zinc plated, and ideal for timber to timber joining. They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
- Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
- Conforms to DIN603 and DIN934 standards.
- Available in a comprehensive range of sizes to suit most applications.
£3.43 Ex Tax: £2.86
- These single thread coach screws are galvanised for increased corrosion resistance.
- The threaded section is approximately two thirds of the total length.
- Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
- These coach screws conform to DIN571 standards.
£3.64 Ex Tax: £3.03
- These single thread coach screws are zinc plated for increased corrosion resistance.
- The threaded section is approximated two thirds of the total length.
- Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
- These coach screws conform to DIN571 standards.
£4.10 Ex Tax: £3.42
- These coach bolts are galvanised, and ideal for timber to timber joining. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
- M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£4.12 Ex Tax: £3.43
- These coach bolts are zinc plated, and ideal for timber to timber joining. They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
- Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
- Conforms to DIN603 and DIN934 standards.
- Available in a comprehensive range of sizes to suit most applications.
£3.54 Ex Tax: £2.95
- These single thread coach screws are zinc plated for increased corrosion resistance.
- The threaded section is approximated two thirds of the total length.
- Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
- These coach screws conform to DIN571 standards.
£4.37 Ex Tax: £3.64
- These coach bolts are galvanised, and ideal for timber to timber joining. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
- M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£4.80 Ex Tax: £4.00
- These coach bolts are zinc plated, and ideal for timber to timber joining. They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
- Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
- Conforms to DIN603 and DIN934 standards.
- Available in a comprehensive range of sizes to suit most applications.
£3.77 Ex Tax: £3.14
- These single thread coach screws are zinc plated for increased corrosion resistance.
- The threaded section is approximated two thirds of the total length.
- Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
- These coach screws conform to DIN571 standards.
£3.35 Ex Tax: £2.79
- These coach bolts are galvanised, and ideal for timber to timber joining. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
- M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£5.12 Ex Tax: £4.27
- These coach bolts are zinc plated, and ideal for timber to timber joining. They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
- Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
- Conforms to DIN603 and DIN934 standards.
- Available in a comprehensive range of sizes to suit most applications.
£3.94 Ex Tax: £3.28
![M10x140 Roofing Bolts Zinc Plated [Incl. Hex Nuts & Washers] (Pack of 10)](https://www.fixingsmegastore.co.uk/image/cache/data/Fixings/Bolts/roofing-bolt-500x500.jpg "M10x140 Roofing Bolts Zinc Plated [Incl. Hex Nuts & Washers] (Pack of 10)")
- Roofing bolts can be used on many DIY projects other than roofing.
- These double slotted roofing bolts have a low profile mushroom head.
- Their bright zinc plated finish increases resistance to corrosion.
- The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
- These are supplied with hex nuts.
£8.28 Ex Tax: £6.90
- These single thread coach screws are galvanised for increased corrosion resistance.
- The threaded section is approximately two thirds of the total length.
- Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
- These coach screws conform to DIN571 standards.
£4.40 Ex Tax: £3.67
- These single thread coach screws are zinc plated for increased corrosion resistance.
- The threaded section is approximated two thirds of the total length.
- Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
- These coach screws conform to DIN571 standards.
£4.46 Ex Tax: £3.72
- These coach bolts are galvanised, and ideal for timber to timber joining. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
- M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£5.41 Ex Tax: £4.51
- These coach bolts are zinc plated, and ideal for timber to timber joining. They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
- Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
- Conforms to DIN603 and DIN934 standards.
- Available in a comprehensive range of sizes to suit most applications.
£4.09 Ex Tax: £3.41
![M10x150 Folded Eye Bolts Zinc Plated [Incl. Nuts & Washers] (Pack of 10)](https://www.fixingsmegastore.co.uk/image/cache/data/Fixings/Bolts/folded-eye-nut-500x500.jpg "M10x150 Folded Eye Bolts Zinc Plated [Incl. Nuts & Washers] (Pack of 10)")
- Folded eye bolts.
- Bright zinc plated CR3+.
- These are supplied with hex nuts and flat washers to suit.
£14.21 Ex Tax: £11.84
- These single thread coach screws are zinc plated for increased corrosion resistance.
- The threaded section is approximated two thirds of the total length.
- Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
- These coach screws conform to DIN571 standards.
£4.60 Ex Tax: £3.83
- These coach bolts are galvanised, and ideal for timber to timber joining. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
- M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£5.57 Ex Tax: £4.64
- These coach bolts are zinc plated, and ideal for timber to timber joining. They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
- Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
- Conforms to DIN603 and DIN934 standards.
- Available in a comprehensive range of sizes to suit most applications.
£4.33 Ex Tax: £3.61
- Roofing bolts can be used on many DIY projects other than roofing.
- These double slotted roofing bolts have a low profile mushroom head.
- Their bright zinc plated finish increases resistance to corrosion.
- The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
- These are supplied with hex nuts.
£6.05 Ex Tax: £5.04
- These single thread coach screws are galvanised for increased corrosion resistance.
- The threaded section is approximately two thirds of the total length.
- Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
- These coach screws conform to DIN571 standards.
£5.22 Ex Tax: £4.35
- These single thread coach screws are zinc plated for increased corrosion resistance.
- The threaded section is approximated two thirds of the total length.
- Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
- These coach screws conform to DIN571 standards.
£4.86 Ex Tax: £4.05