Search

Search Criteria

Products meeting the search criteria

Show:
Sort By:
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£5.12 Ex Tax: £4.27
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£3.94 Ex Tax: £3.28
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Bright zinc plated for protection against corrosion.
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£4.69 Ex Tax: £3.91
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£3.86 Ex Tax: £3.22
  • Roofing bolts can be used on many DIY projects other than roofing.
  • These double slotted roofing bolts have a low profile mushroom head.
  • Their bright zinc plated finish increases resistance to corrosion.
  • The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
  • These are supplied with hex nuts.
£8.28 Ex Tax: £6.90
  • These single thread coach screws are galvanised for increased corrosion resistance.
  • The threaded section is approximately two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£4.40 Ex Tax: £3.67
  • These single thread coach screws are zinc plated for increased corrosion resistance.
  • The threaded section is approximated two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£4.46 Ex Tax: £3.72
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£5.41 Ex Tax: £4.51
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£4.09 Ex Tax: £3.41
  • Folded eye bolts.
  • Bright zinc plated CR3+.
  • These are supplied with hex nuts and flat washers to suit.
£14.21 Ex Tax: £11.84
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Bright zinc plated for protection against corrosion.
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£4.99 Ex Tax: £4.16
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£5.30 Ex Tax: £4.42
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£2.99 Ex Tax: £2.49
  • These single thread coach screws are zinc plated for increased corrosion resistance.
  • The threaded section is approximated two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£4.60 Ex Tax: £3.83
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£5.57 Ex Tax: £4.64
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£4.33 Ex Tax: £3.61
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Bright zinc plated for protection against corrosion.
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£5.57 Ex Tax: £4.64
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£5.48 Ex Tax: £4.57
  • Roofing bolts can be used on many DIY projects other than roofing.
  • These double slotted roofing bolts have a low profile mushroom head.
  • Their bright zinc plated finish increases resistance to corrosion.
  • The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
  • These are supplied with hex nuts.
£6.05 Ex Tax: £5.04
  • These single thread coach screws are galvanised for increased corrosion resistance.
  • The threaded section is approximately two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£5.22 Ex Tax: £4.35
  • These single thread coach screws are zinc plated for increased corrosion resistance.
  • The threaded section is approximated two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£4.86 Ex Tax: £4.05
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£4.93 Ex Tax: £4.11
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£4.69 Ex Tax: £3.91
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Bright zinc plated for protection against corrosion.
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£5.28 Ex Tax: £4.40
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£7.58 Ex Tax: £6.32
  • Hook bolts.
  • Zinc & yellow passivated Cr3+.
  • Supplied with square nuts.
  • Washers are available seperately.
£41.20 Ex Tax: £34.33
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£3.48 Ex Tax: £2.90
  • These set screws are made from grade 8.8 steel.
  • Galvanised for increased resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£3.29 Ex Tax: £2.74
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£3.29 Ex Tax: £2.74
  • Set screws.
  • Brass DIN933.
  • Nuts and washers are available seperately.
£12.22 Ex Tax: £10.18
  • These single thread coach screws are galvanised for increased corrosion resistance.
  • The threaded section is approximately two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£5.34 Ex Tax: £4.45
  • These single thread coach screws are zinc plated for increased corrosion resistance.
  • The threaded section is approximated two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£5.62 Ex Tax: £4.68
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£5.23 Ex Tax: £4.36
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • They come complete with with a hex nut and are fully threaded to 100mm. Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
  • Available in a comprehensive range of sizes to suit most applications.
£5.04 Ex Tax: £4.20
  • Folded eye bolts.
  • Bright zinc plated CR3+.
  • These are supplied with hex nuts and flat washers to suit.
£16.51 Ex Tax: £13.76
  • These high tensile hex head bolts are made from 8.8 grade steel.
  • Bright zinc plated for protection against corrosion.
  • The bolts are part threaded and conform to DIN933 standards.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£5.34 Ex Tax: £4.45
  • These set screws are made from grade 8.8 steel.
  • Zinc plated for resistance to corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£8.14 Ex Tax: £6.78
  • Roofing bolts can be used on many DIY projects other than roofing.
  • These double slotted roofing bolts have a low profile mushroom head.
  • Their bright zinc plated finish increases resistance to corrosion.
  • The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting.
  • These are supplied with hex nuts.
£7.67 Ex Tax: £6.39
  • These single thread coach screws are galvanised for increased corrosion resistance.
  • The threaded section is approximately two thirds of the total length.
  • Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers.
  • These coach screws conform to DIN571 standards.
£9.90 Ex Tax: £8.25
  • These coach bolts are galvanised, and ideal for timber to timber joining.
  • Coach bolts upto 100mm are fully threaded, over 100mm will have a minimum of 100mm of thread unless stated.
  • M8, M10 and M12 galvanised versions do not come supplied with any nuts unless stated.
£6.74 Ex Tax: £5.62