save our number 0800 009 6949 and message us through WhatsApp

Search

Search Criteria

Products meeting the search criteria

Show:
Sort By:
  • Wedge lock nuts provide a high-quality, user-friendly bolt securing system for the most demanding of applications and is ideal for repeated use.
  • The captive and rotary combination of nut and the wedge lock washers makes securing your bolted joints more efficient, effectiveand easier even under the most extreme vibrations and dynamic loads.
£0.00 Ex Tax: £0.00
  • A single component joint filling system for the simple and rapid pointing of paved areas with joints over 5mm.
  • Ready-to-use, simple brush application.
  • A unique blend of polymers and aggregates that bind together chemically.
  • On exposure to the atmosphere Joint-Fill forms a stable, solid, mass that is unaffected by the weather once cured.
  • Remains permeable and allows rain water to pass into water course reducing puddling.
  • Eliminates the need for sand/cement pointing.
£0.00 Ex Tax: £0.00
  • Woodspade drill bits are also known as flat bits. 
  • Easy to use for fast, clean hols through studs, joists and other soft woods.
  • Fit most standard quick-change chucks.
£0.00 Ex Tax: £0.00
  • Neutral cure glazing silicone.
  • Suitable for all PVC and glass use (Not bedding in).
  • 20 year lifespan.
£0.00 Ex Tax: £0.00
  • ZG-90 cold zinc galvanise brushing is fast drying rust protection for use on light rust or clean metal.
  • ZG-90 is specially formulated to perform as an undercoat and topcoat combined in one product.
  • Shower proof in 15 minutes and hard dry in 2 hours.
  • On most surfaces one coat of ZG-90 is all that is required
£0.00 Ex Tax: £0.00
  • Thermo-Forged of alloy steel and scientifically heat treated, they are stronger than conventional screws, size for size.
  • Fewer screws or smaller screws are required to fulfill a given holding assignment.
  • As a general rule, a Holo-Krome cap screw is comparable in strength to an ordinary screw of the next larger standard diameter.
£0.00 Ex Tax: £0.00
  • Thermo-Forged of alloy steel and scientifically heat treated, they are stronger than conventional screws, size for size.
  • Fewer screws or smaller screws are required to fulfill a given holding assignment.
  • As a general rule, a Holo-Krome cap screw is comparable in strength to an ordinary screw of the next larger standard diameter.
£0.00 Ex Tax: £0.00
  • These buttton socket screws are stainless steel.
  • Manufactured to ISO 7380 standards.
  • The head is designed to be driven by a hex key.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • When placed into a conical cut hole, the countersunk head will sit flush with or below the surface of the surrounding material, improving the finish of the product and removing any potential trip / catch hazard.
  • The head is designed to be driven by a hex key.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • The Shield Anchor is an A4 Stainless Steel three way expansion shield suitable for use in brick and concrete.
  • The thick walls of the expanders give the anchor its exceptional grip and allow it to cater for oversized holes caused by powerful drills in weaker materials such as brick work.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Specially manufactured to have a lower head.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • These buttton socket screws are self colour.
  • Manufactured to ISO 7380 grade 10.9 standards.
  • The head is designed to be driven by a hex key.
  • Self colour finish.
£0.00 Ex Tax: £0.00
  • Holo-Krome button head cap screws contribute in important ways in carrying out modern design techniques which call for smooth contours and surfaces, elimination of clumsy, bulky parts and use of lighter constructions as they apply to flanges, lugs, pockets, and cover plates.
  • They are stronger than conventional screws, size for size.
  • Fewer screws or smaller screws are required to fulfill a given holding assignment. As a general rule, a Holo-Krome cap screw is comparable in strength to an ordinary screw of the next larger standard diameter.
£0.00 Ex Tax: £0.00
  • When placed into a conical cut hole, the countersunk head will sit flush with or below the surface of the surrounding material, improving the finish of the product and removing any potential trip / catch hazard.
  • The head is designed to be driven by a hex key.
  • Self colour finish.
£0.00 Ex Tax: £0.00
  • Holo-Krome offers flat head Screws in 95 standard sizes.
  • These heavy-duty screws are especially well suited to fastening thin plates, strips, moldings, and sheet metal parts where the advantages of maximum head contact, flush surfaces and nonslip wrenching action are combined.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from natural nylon.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Hank rivet bushes provide a permanent deep tapped hole in think sheet metals or plastics.
  • They attach to sheet metal by peining spigot into a round hole in sheet metal.
  • Supplied in a self colour finish.
£0.00 Ex Tax: £0.00
  • Hank rivet bushes provide a permanent deep tapped hole in think sheet metals or plastics.
  • They attach to sheet metal by peining spigot into a round hole in sheet metal.
  • Supplied in a self colour finish.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Thermo-Forged of alloy steel and scientifically heat treated, they are stronger than conventional screws, size for size.
  • Fewer screws or smaller screws are required to fulfill a given holding assignment.
  • As a general rule, a Holo-Krome cap screw is comparable in strength to an ordinary screw of the next larger standard diameter.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • These buttton socket screws are stainless steel.
  • Manufactured to ISO 7380 standards.
  • The head is designed to be driven by a hex key.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • When placed into a conical cut hole, the countersunk head will sit flush with or below the surface of the surrounding material, improving the finish of the product and removing any potential trip / catch hazard.
  • The head is designed to be driven by a hex key.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • These buttton socket screws are stainless steel.
  • Manufactured to ISO 7380 standards.
  • The head is designed to be driven by a hex key.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • When placed into a conical cut hole, the countersunk head will sit flush with or below the surface of the surrounding material, improving the finish of the product and removing any potential trip / catch hazard.
  • The head is designed to be driven by a hex key.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • These buttton socket screws are self colour.
  • Manufactured to ISO 7380 grade 10.9 standards.
  • The head is designed to be driven by a hex key.
  • Self colour finish.
£0.00 Ex Tax: £0.00
  • Holo-Krome button head cap screws contribute in important ways in carrying out modern design techniques which call for smooth contours and surfaces, elimination of clumsy, bulky parts and use of lighter constructions as they apply to flanges, lugs, pockets, and cover plates.
  • They are stronger than conventional screws, size for size.
  • Fewer screws or smaller screws are required to fulfill a given holding assignment. As a general rule, a Holo-Krome cap screw is comparable in strength to an ordinary screw of the next larger standard diameter.
£0.00 Ex Tax: £0.00
  • When placed into a conical cut hole, the countersunk head will sit flush with or below the surface of the surrounding material, improving the finish of the product and removing any potential trip / catch hazard.
  • The head is designed to be driven by a hex key.
  • Self colour finish.
£0.00 Ex Tax: £0.00
  • Holo-Krome offers flat head Screws in 95 standard sizes.
  • These heavy-duty screws are especially well suited to fastening thin plates, strips, moldings, and sheet metal parts where the advantages of maximum head contact, flush surfaces and nonslip wrenching action are combined.
£0.00 Ex Tax: £0.00
  • Form A flat washers are thicker than the more popular form B type washers.
  • They are manufactured from natural nylon.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£0.00 Ex Tax: £0.00
  • Hank rivet bushes provide a permanent deep tapped hole in think sheet metals or plastics.
  • They attach to sheet metal by peining spigot into a round hole in sheet metal.
  • Supplied in a self colour finish.
£0.00 Ex Tax: £0.00
  • Low head socket head cap screws are high strength, precision fasteners that are designed to be used in applications where head height is a problem.
  • Because of their reduced head height and smaller socket size, they cannot be preloaded as high as a standard socket head cap screw.
£0.00 Ex Tax: £0.00
  • Hank rivet bushes provide a permanent deep tapped hole in think sheet metals or plastics.
  • They attach to sheet metal by peining spigot into a round hole in sheet metal.
  • Supplied in a self colour finish.
£0.00 Ex Tax: £0.00
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00
  • Thermo-Forged of alloy steel and scientifically heat treated, they are stronger than conventional screws, size for size.
  • Fewer screws or smaller screws are required to fulfill a given holding assignment.
  • As a general rule, a Holo-Krome cap screw is comparable in strength to an ordinary screw of the next larger standard diameter.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£0.00 Ex Tax: £0.00