Drill Bits & Holesaws

Drill Bits & Holesaws
Show:
Sort By:
5, 6, and 8mm Tile / Glass Drill ..
£5.84 Ex Tax: £4.87
6 Piece Woodspade Flat Bit Set 10-25mm ..
£8.65 Ex Tax: £7.21
7 Piece Masonry Drill Bit Set ..
£4.76 Ex Tax: £3.97
  • Abracs's holesaws are manufactured using bi-metal hole saw engineering and use only the premium quality materials to give exceptionally strong and durable performance.
£0.00 Ex Tax: £0.00
  • Auger bits include a rotating helical screw blade that acts as a conveyor ot remove drilled out material.
  • The blade rotation causes the material to move out of the hole being drilled.  
£0.00 Ex Tax: £0.00
  • CarbideMax TCT Annular cutters are for the most extreme drilling depths through thick metal, box sections or stacked plate.
  • The CarbideMax 150mm Broach Cutter has precision drilling flutes and a specially engineered geometry for accurate cutting.
  • These cutters come with a standard 19.05mm Weldon shank for use in any magnet drill with sufficient stroke.
£0.00 Ex Tax: £0.00
  • These completely unique CarbideMax TCT Annular cutters are for the most extreme drilling depths through thick metal, box sections or stacked plate.
  • Ideal for drilling matching holes through box or H section in one single pass.
  • The CarbideMax 200mm Broach Cutterhas precision drilling flutes and a specially engineered geometry for accurate cutting.
  • These cutters come with a standard 19.05mm Weldon shank for use in any magnet drill with sufficent stroke.
£0.00 Ex Tax: £0.00
  • The CarbideMax 40 series will broach up to 35mm thickness of metal.
  • Up to 4x longer life and 15% faster cut than HSS cutters.
  • One of the hardest cutting tools, Tungsten Carbide is capable of drilling through the toughest steels.
£0.00 Ex Tax: £0.00
  • The CarbideMax 55 Series will broach up to 50mm thickness of metal.
  • Up to 4x longer life and 15% faster cut than HSS cutters.
  • One of the hardest materials used for cutting tools, Tungsten Carbide, is capable of drilling through the hardest steels.
  • HMT CarbideMax TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality carbide.
  • They are designed with an elaborate cutting geometry which results in faster, quieter, easier drilling and chatter free performance.
  • Furthermore, because the teeth of the cutter are doing all of the hard work, less strain is put on the wall of the cutter.
  • Therefore a thinner wall thickness is required meaning less material is removed resulting in a substantially faster cut.
£0.00 Ex Tax: £0.00
  • CarbideMax 55 TCT Rai Tungsten Carbide Broaching cutters are specially designed for drilling railtrack material.
  • Specially machined cutting geometry offers superior performance over against HSS cutters and other similar alternatives with in excess of 100 holes in UIC 60 Rail achievable.
  • The RailMax 55 Series will broach up to 50mm thickness of steel.
  • Suitable for Cembre, Rotabroach and other similar rail track drilling machines.
£0.00 Ex Tax: £0.00
  • The CarbideMax 55 Series will broach up to 75mm thickness of metal.
  • Up to 4x longer life and 15% faster cut than HSS cutters.
  • One of the hardest materials used for cutting tools, Tungsten Carbide, is capable of drilling through the hardest steels.
  • HMT CarbideMax TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality carbide.
  • They are designed with an elaborate cutting geometry which results in faster, quieter, easier drilling and chatter free performance.
  • Furthermore, because the teeth of the cutter are doing all of the hard work, less strain is put on the wall of the cutter.
  • Therefore a thinner wall thickness is required meaning less material is removed resulting in a substantially faster cut.
£0.00 Ex Tax: £0.00
  • CarbideMax 30 TCT Rail Tungsten Carbide Broaching cutters are specially designed for drilling railtrack material.
  • Specially machined cutting geometry offers superior performance over against HSS cutters and other similar alternatives with in excess of 100 holes in UIC 60 Rail achievable.
  • The RailMax 30 Series will broach up to 30mm thickness of steel.
  • Suitable for Cembre, Rotabroach and other similar rail track drilling machines.
£0.00 Ex Tax: £0.00
  • High quality 100mm extension arbor for improving access to deep drilling applications.
  • Extended pilot pin may be needed.
  • Can be mounted in series for extreme depth applications.
  • 35mm diameter.
£0.00 Ex Tax: £0.00
  • With the requirement for ultra large diameter broaching fast increasing, HMT have launched the CarbideMax-XL range of Tungsten Carbide Tipped cutters from 60mm right up to 200mm diameter with 110mm cutting depth as standard.
  • These high quality TCT cutters have a reinforced 32mm diameter shank to withstand the high levels of torque generated.
  • Large diameter broaching has its own unique challenges relating to correct machine size, RPM, lubricant and feed rates.
  • Hire machines for large diameter broaching available from stock.
£0.00 Ex Tax: £0.00
  • With the requirement for ultra large diameter broaching fast increasing, HMT have launched the CarbideMax-XL range of Tungsten Carbide Tipped cutters from 65 right up to 150mm diameter with 55mm cutting depth as standard.
  • These high quality TCT cutters have a reinforced 32mm diameter shank to withstand the high levels of torque generated.
  • Large diameter broaching has its own unique challenges relating to correct machine size, RPM, lubricant and feed rates.
  • Contact our sales team to discuss your particular application.
£0.00 Ex Tax: £0.00
  • With the requirement for ultra large diameter broaching fast increasing, HMT have launched the CarbideMax-XL range of Tungsten Carbide Tipped cutters from 65 right up to 150mm diameter with 55mm cutting depth as standard.
  • These high quality TCT cutters have a reinforced 32mm diameter shank to withstand the high levels of torque generated.
  • Large diameter broaching has its own unique challenges relating to correct machine size, RPM, lubricant and feed rates.
  • Contact our sales team to discuss your particular application.
£0.00 Ex Tax: £0.00
  • Manufactured using tool grade steel and premium quality diamond grain. 150mm length with a 10mm diamond segment set into the metal core. Excellent working life, speed and performance. Kit contains the 5 most popular sizes plus a full range of accessories and is supplied in a sturdy and secure aluminium case.
  • 5 Dry Diamond Cores - sizes 42mm, 52mm, 65mm, 117mm, 127mm
  • Accessories - Chuck Adaptor, SDS Adaptor, Universal Extension, Guide Rod, Drift Key, Masonry Bit, Aluminium Trolley Case
£0.00 Ex Tax: £0.00
Handy 4pc Set Case containing 1 each Flame, Cylinder, Ball Nose, and Tree burrrs in 12mm head..
£136.44 Ex Tax: £113.70
  • Spare grub screws to suit virtually all standard magnet drill arbors, fittings and components.
£0.00 Ex Tax: £0.00
  • AeroPaste is an aerosol applied paste-type aerosol lubricant for hole broaching, tapping, reaming & drilling applications.
  • Ideal for overhead or positional application, the high viscosity of AeroPaste allows it to cling directly to the cutting tool or steel it is applied to, without fluid run-off.
  • A preferred lubricant for use in environmentally sensitive areas such as above water. Using AeroPaste minimises repainting or galvanising issues caused by conventional soluble lubricants and reduces mess and slipping hazards.
  • HMT Aerosol Lubricants have a 2 year shelf life. The production month and year can be seen printed on the bottom of the can.
£0.00 Ex Tax: £0.00
  • Water-soluble fluid supplied ready-for-use.
  • Inherently bio-degradable, can be 100% removed with water.
  • Synthetic based, chlorine free, with zero mineral oils.
  • No adverse affects for welding and galvanising.
£0.00 Ex Tax: £0.00
  • BioCut cutting paste is specifically formulated for superb performance when used with HMT Impact wrench cutting tools.
  • Extreme pressure concentration provides accurate hole lubrication.
  • Excellent general purpose paste lubricant when drilling, tapping, taps, countersinks, reamers and broach cutters.
  • Chlorine Free for safer use.
  • Suitable for use with all grades of steel including Stainless Steel & Aluminium.
  • Low Mess.
£0.00 Ex Tax: £0.00
  • The TCT MultiSink is a worldwide unique new Combination Countersink Tool designed and developed by HMT for use with magnetic drills, allowing the user to combine the tool with the VersaDrive product range to broach & countersink, drill & countersink, tap & countersink or even drill, tap & countersink in one operation - providing huge time-saving benefits.
  • The new Tungsten Carbide tipped version of this tool enables superior results on hard materials.
  • The countersunk hole will be centred by the VersaDrive tool it is piloted with, meaning that holes are accurately countersunk every time. As the MultiSink hole is self-piloted it will provide a smooth cutting action, preventing the chattering and reduced tool life commonly experienced with standard countersinks.
£0.00 Ex Tax: £0.00
  • Fast, smooth drilling with miminal kickback; Specially hardened for impact wrench use.
  • Precision ground flutes with deep web design for easy chip clearance.
  • 135 degree SPLIT point angle for easy starting and high accuracy
  • 8% Cobalt for long life and endurance in structural steel and hard metals.
  • Goldmax low-friction titanium coating to stop heat burn-out.
  • High strength, non-slip shank design.
£0.00 Ex Tax: £0.00
  • HMT Morse Taper Shank HSS Countersinks now come with the benefit of the special GoldMax coating for increased tool life, even when used without lubricant.
  • Standard 90 Degree Point Angle - 60 Degree available.
£0.00 Ex Tax: £0.00
  • GoldMax TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life.
  • The HP2 Cut gives a smooth operation with short chips.
  • These burrs are recommended for use with high-speed die grinders or straight grinders.
  • Titanium Coating for long life and cooler cut.
  • All burrs are 100% braze tested for strength and safety.
£0.00 Ex Tax: £0.00
  • GoldMax TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life.
  • All burrs are 100% braze tested for strength and safety.
£0.00 Ex Tax: £0.00
  • GoldMax TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life.
  • The HP2 Cut gives a smooth operation with short chips.
  • These burrs are recommended for use with high-speed die grinders or straight grinders.
  • Titanium Coating for long life and cooler cut.
  • All burrs are 100% braze tested for strength and safety.
£0.00 Ex Tax: £0.00
  • GoldMax TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life.
  • The HP2 Cut gives a smooth operation with short chips.
  • These burrs are recommended for use with high-speed die grinders or straight grinders.
  • Titanium Coating for long life and cooler cut.
  • All burrs are 100% braze tested for strength and safety.
£0.00 Ex Tax: £0.00
  • GoldMax TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life.
  • The HP2 Cut gives a smooth operation with short chips.
  • These burrs are recommended for use with high-speed die grinders or straight grinders.
  • Titanium Coating for long life and cooler cut.
  • All burrs are 100% braze tested for strength and safety.
£0.00 Ex Tax: £0.00
  • The MultiSink is a worldwide unique new Combination Countersink Tool designed and developed by HMT for use with Magnetic Drills, allowing the user to combine the tool with the VersaDrive product range to Broach & Countersink, Drill & Countersink, Tap & Countersink or even Drill, Tap & Countersink in one operation - providing huge time-saving benefits.
  • The Countersunk hole will be centred by the VersaDrive Tool it is piloted with, meaning that holes are accurately countersunk every time.
  • As the MultiSink hole is self-piloted it will provide a smooth cutting action, preventing the chattering and reduced tool life commonly experienced with standard countersinks.
  • The MultiSink can also be used as dedicated Countersink only tool used with the pilot pin to ensure smooth hole running and exact accuracy every time.
£0.00 Ex Tax: £0.00
  • The HMT ImpactaMag HSS reamer is a unique double-use reamer for enlarging and aligning holes in metals and hard materials; with a specially designed cutting geometry that is designed to allow the tool to be used in an Impact wrench or a Magnet drill.
  • When used in an Impact wrench it is secured into a special adapter meaning the tool is easier to control, apply correct feed rate, and withdraw from the finished hole, enhancing tool life.
  • This reamer will also fit into a standard weldon magnet drill arbor, providing a versatile 2 in 1 solution for circumstances where it may be more appropriate to use a magnet drill.
  • Ideal for steel erectors and bridge work. Used for Network Rail bridge refurbishment and strengthening.
  • Ideal for modifying and enlarging holes ready for the installation of TCB bolts and friction grip bolts.
£0.00 Ex Tax: £0.00
  • SpeedLube is a high-performance lubricant spray suitable for machine or hand-held drilling, tapping, broaching and countersinking cutting tool applications across a wide range of metals including stainless steel.
  • Aerosol propellant ensures the lubricant foams on contact to ensure maximum tool coverage and heat dissipation.
  • Easy one-handed provides fast, efficient lubricant coverage and minimises the number of applications required during the drilling process.
  • A unique 360 degree valve which enables SpeedLube to be sprayed from all angles.
  • HMT Aerosol Lubricants have a 2 year shelf life. The production month and year can be seen printed on the bottom of the can.
£0.00 Ex Tax: £0.00
  • Patented Drill Point - 50% Faster Drilling with 30% less presure.
  • Incredible Finished Hole quality.
  • Instant drill start with no slipping.
  • No snatch when drill bit breaks through.
  • Fantastic Tool Life.
  • Fully Impact Rated on structural steel
£0.00 Ex Tax: £0.00
  • Quality all-metal adapter intended for use in Magnet drills when used with standard straight shank twist drills.
  • Takes drill bits up to 13mm shank.
£25.39 Ex Tax: £21.16
  • Quality all-metal chick and adapter intended for use in magnet drills when used with stnardard straight shank twist drills.
  • Takes drill bits up to 13mm shank.
£51.49 Ex Tax: £42.91
  • A unique magnet drilling extension accessory developed specifically for use in extreme depth drilling applications, where multiple extension arbors are mounted in series to achieve the required drilling depth.
  • Traditionally this application meantit was not possible to use a pilot pin with your broach cutter, leading to drilling instability. However, the retractable spring-loaded extension arboris designed to be used at the bottom of a series of extension arbors, meaning a standard pilot pin can be used with the broach cutter and used in normal operation, like with a standard spring loaded magnet drill arbor.
  • 35mm diameter.
£122.86 Ex Tax: £102.38
  • Upgraded design magnetic swarf lifter for safe and efficient removal of swarf from the cutting area.
  • 400mm overall length.
  • Heavy duty magnets for industrial fabrication use.
£41.99 Ex Tax: £34.99
The new VersaDrive HD impact wrench adapter has been developed to work with the latest genera..
£72.01 Ex Tax: £60.01
High quality 1/4in impact driver adapter for use with all standard 1/4in drive impact wrenche..
£37.18 Ex Tax: £30.98