HX Fixings

Show:
Sort By:
  • Threaded rods are unplated, and provide cost effective fastening solution for many varied applications.
  • They can be used with many other products including drop-in anchors and masonry anchor shields.
£8.50 Ex Tax: £7.08
  • These hexagon nuts are self colour without any corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£7.48 Ex Tax: £6.23
  • These hexagon nuts are self colour without any corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£8.46 Ex Tax: £7.05
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£19.14 Ex Tax: £15.95
  • These hexagon nuts are self colour without any corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£7.40 Ex Tax: £6.17
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£17.32 Ex Tax: £14.43
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£7.73 Ex Tax: £6.44
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • UNC thread.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are zinc-plated for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£9.55 Ex Tax: £7.96
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are stainless steel grade 304 (A2) for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£32.36 Ex Tax: £26.97
  • These hexagon nuts are self colour without any corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£6.89 Ex Tax: £5.74
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£8.06 Ex Tax: £6.72
  • These hexagon half nuts are self colour without any corrosion resistance.
  • Self colour.
£8.77 Ex Tax: £7.31
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • UNF thread.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are zinc-plated for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£11.69 Ex Tax: £9.74
  • These hex head set screws are made from 304 (A2) grade stainless steel.
  • Provides protection against corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£48.20 Ex Tax: £40.17
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£38.33 Ex Tax: £31.94
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£44.06 Ex Tax: £36.72
  • These hex head set screws are made from 304 (A2) grade stainless steel.
  • Provides protection against corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£58.88 Ex Tax: £49.07
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£32.28 Ex Tax: £26.90
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£32.36 Ex Tax: £26.97
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£22.08 Ex Tax: £18.40
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£44.96 Ex Tax: £37.47
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£41.71 Ex Tax: £34.76
  • These hex head set screws are made from 304 (A2) grade stainless steel.
  • Provides protection against corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£42.05 Ex Tax: £35.04
  • These set screws are made from grade 8.8 steel.
  • They are fully threaded and conform to DIN 933 standards.
  • Zinc plated for increased resistance to corrosion.
  • Can be used with many nut types and washers.
£46.01 Ex Tax: £38.34
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£41.22 Ex Tax: £34.35
  • These set screws are made from grade 8.8 steel.
  • They are fully threaded and conform to DIN 933 standards.
  • Zinc plated for increased resistance to corrosion.
  • Can be used with many nut types and washers.
£45.74 Ex Tax: £38.12
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£28.51 Ex Tax: £23.76
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£64.30 Ex Tax: £53.58
  • These set screws are made from grade 8.8 steel.
  • They are fully threaded and conform to DIN 933 standards.
  • Zinc plated for increased resistance to corrosion.
  • Can be used with many nut types and washers.
£47.65 Ex Tax: £39.71
  • These set screws are made from grade 8.8 steel.
  • They are fully threaded and conform to DIN 933 standards.
  • Zinc plated for increased resistance to corrosion.
  • Can be used with many nut types and washers.
£50.98 Ex Tax: £42.48
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£76.38 Ex Tax: £63.65
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£55.62 Ex Tax: £46.35
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£47.02 Ex Tax: £39.18
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£31.94 Ex Tax: £26.62
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£29.72 Ex Tax: £24.77
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£128.33 Ex Tax: £106.94
  • These hex head set screws are made from 304 (A2) grade stainless steel.
  • Provides protection against corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£28.40 Ex Tax: £23.67
  • These set screws are made from grade 8.8 steel.
  • They are fully threaded and conform to DIN 933 standards.
  • Zinc plated for increased resistance to corrosion.
  • Can be used with many nut types and washers.
£39.05 Ex Tax: £32.54
  • These set screws are made from grade 8.8 steel.
  • They are fully threaded and conform to DIN 933 standards.
  • Zinc plated for increased resistance to corrosion.
  • Can be used with many nut types and washers.
£52.30 Ex Tax: £43.58
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£51.52 Ex Tax: £42.93