HX Fixings

Show:
Sort By:
102x42 right angle bracket 2 hole x 1 hole.Galvanised.Galvanised coatings prevent oxidation of the p..
£33.55 Ex Tax: £27.96
102x86 right angle bracket 2 hole x 2 hole.Galvanised.Galvanised coatings prevent oxidation of the p..
£21.59 Ex Tax: £17.99
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£28.18 Ex Tax: £23.48
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£30.36 Ex Tax: £25.30
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£26.02 Ex Tax: £21.68
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£36.97 Ex Tax: £30.81
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£27.68 Ex Tax: £23.07
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£43.32 Ex Tax: £36.10
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£52.54 Ex Tax: £43.78
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£98.27 Ex Tax: £81.89
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£67.32 Ex Tax: £56.10
  • A hex key is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
  • Can be used on our socket screw range of fixings.
£31.72 Ex Tax: £26.43
  • Slotted pan head self tapping screws.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£35.47 Ex Tax: £29.56
  • Slotted pan head self tapping screws.
  • Stainless steel grade 304 (A2) for increased resistance to corrosion.
£21.41 Ex Tax: £17.84
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£57.16 Ex Tax: £47.63
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£25.39 Ex Tax: £21.16
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£18.34 Ex Tax: £15.28
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£21.70 Ex Tax: £18.08
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£25.09 Ex Tax: £20.91
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£34.90 Ex Tax: £29.08
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£41.08 Ex Tax: £34.23
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£30.71 Ex Tax: £25.59
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£41.26 Ex Tax: £34.38
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£70.39 Ex Tax: £58.66
  • A hex key is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
  • Can be used on our socket screw range of fixings.
£81.64 Ex Tax: £68.03
  • A hex key is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
  • Can be used on our socket screw range of fixings.
£92.00 Ex Tax: £76.67
150mm cantilever arms.Galvanised.Galvanised coatings prevent oxidation of the protected metal to cre..
£37.06 Ex Tax: £30.88
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£14.57 Ex Tax: £12.14
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£53.02 Ex Tax: £44.18
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£57.26 Ex Tax: £47.72
  • A shoulder screw has a partially smooth shaft that will allow the bolted material some rotation and movement around the screw axis, while the threaded end will typically have a nut to maintain the screw's position.
  • They are used in instances where pre-tapped holes require alignment with some tolerance.
  • This allows the work pieces either a joint, pivot, or sliding motion.
£79.78 Ex Tax: £66.48
  • A hex key is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
  • Can be used on our socket screw range of fixings.
£73.07 Ex Tax: £60.89
  • A hex key is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
  • Can be used on our socket screw range of fixings.
£85.97 Ex Tax: £71.64
  • Table 3 washers.
  • They are bright zinc plated.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£17.62 Ex Tax: £14.68
Table 3 washers.They are bright zinc plated.Washers provide a smooth surface for the nut or bolt to ..
£17.93 Ex Tax: £14.94
  • Table 4 washers.
  • They are bright zinc plated.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£21.88 Ex Tax: £18.23
  • Table 7 washers.
  • They are self colour.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£331.88 Ex Tax: £276.57
  • Threaded rods are unplated, and provide cost effective fastening solution for many varied applications.
  • They can be used with many other products including drop-in anchors and masonry anchor shields.
£43.84 Ex Tax: £36.53
  • These hexagon nuts are black self colour without any corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£26.42 Ex Tax: £22.02
2 hole splice plate.Galvanised.Galvanised coatings prevent oxidation of the protected metal to creat..
£35.54 Ex Tax: £29.62