HX Fixings

Show:
Sort By:
  • Hexagon bolts in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£84.24 Ex Tax: £70.20
  • British standard pipe thread taper pressure plugs.
  • Taper pressure plugs are made to close tolerances and will seal at pressure up to 500psi without the use of sealing compounds.
  • They are often used for hydraulic and pneumatic applications.

Sealing is achieved by crushing the crest of one thread against the root of the mating thread. Dryseal plugs are used more frequentlyespecially where re-use is required. More threads are engaged therfore creating a better seal. They are also prefered for use in softer materials to reduce the risk of over-torquing.

£91.37 Ex Tax: £76.14
  • British standard pipe thread taper pressure plugs.
  • Taper pressure plugs are made to close tolerances and will seal at pressure up to 500psi without the use of sealing compounds.
  • They are often used for hydraulic and pneumatic applications.

Sealing is achieved by crushing the crest of one thread against the root of the mating thread. Dryseal plugs are used more frequentlyespecially where re-use is required. More threads are engaged therfore creating a better seal. They are also prefered for use in softer materials to reduce the risk of over-torquing.

£65.26 Ex Tax: £54.38
  • Table 3 washers.
  • They are bright zinc plated.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£11.99 Ex Tax: £9.99
Table 3 washers.They are bright zinc plated.Washers provide a smooth surface for the nut or bolt to ..
£7.44 Ex Tax: £6.20
  • Table 4 washers.
  • They are bright zinc plated.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£19.34 Ex Tax: £16.12
  • Table 8 washers.
  • They are bright zinc plated.
  • Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface.
  • The main purpose of a washer is to distribute the load under a bolt head or the nut face.
£269.63 Ex Tax: £224.69
  • Threaded rods are unplated, and provide cost effective fastening solution for many varied applications.
  • They can be used with many other products including drop-in anchors and masonry anchor shields.
£14.00 Ex Tax: £11.67
  • Threaded rods are unplated, and provide cost effective fastening solution for many varied applications.
  • They can be used with many other products including drop-in anchors and masonry anchor shields.
£4.75 Ex Tax: £3.96
  • These hexagon nuts are self colour without any corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£3.65 Ex Tax: £3.04
  • These hexagon nuts are self colour without any corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£4.36 Ex Tax: £3.63
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£13.18 Ex Tax: £10.98
  • These hexagon nuts are self colour without any corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£5.17 Ex Tax: £4.31
  • These hexagon nuts are manufactured from stainless steel grade 304 (A2) for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£9.49 Ex Tax: £7.91
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£5.15 Ex Tax: £4.29
  • These hexagon half nuts are self colour without any corrosion resistance.
  • Self colour.
£6.29 Ex Tax: £5.24
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • UNC thread.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are zinc-plated for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£6.16 Ex Tax: £5.13
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are stainless steel grade 304 (A2) for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£15.44 Ex Tax: £12.87
  • These hexagon nuts are self colour without any corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£4.70 Ex Tax: £3.92
  • These hexagon nuts are bright zinc plated for increased corrosion resistance.
  • The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£4.54 Ex Tax: £3.78
  • These hexagon half nuts are self colour without any corrosion resistance.
  • Self colour.
£8.18 Ex Tax: £6.82
  • A nyloc hexagon nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt.
  • UNF thread.
  • The nylon component has a smaller inside diameter than the actual nut.
  • This locks the nut in place by squeezing the nylon firmly around the bolt when tightened.
  • Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened.
  • The nuts are zinc-plated for increased resistance to corrosion.
  • Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so.
£6.11 Ex Tax: £5.09
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£16.88 Ex Tax: £14.07
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£22.28 Ex Tax: £18.57
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£14.80 Ex Tax: £12.33
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£19.26 Ex Tax: £16.05
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£54.07 Ex Tax: £45.06
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£45.97 Ex Tax: £38.31
  • These hex head set screws are made from 304 (A2) grade stainless steel.
  • Provides protection against corrosion.
  • They are fully threaded and conform to DIN 933 standards.
  • Can be used with many nut types and washers.
£16.42 Ex Tax: £13.68
  • These set screws are made from grade 8.8 steel.
  • They are fully threaded and conform to DIN 933 standards.
  • Zinc plated for increased resistance to corrosion.
  • Can be used with many nut types and washers.
£47.28 Ex Tax: £39.40
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£19.99 Ex Tax: £16.66
  • These set screws are made from grade 8.8 steel.
  • They are fully threaded and conform to DIN 933 standards.
  • Zinc plated for increased resistance to corrosion.
  • Can be used with many nut types and washers.
£47.28 Ex Tax: £39.40
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£11.88 Ex Tax: £9.90
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£160.61 Ex Tax: £133.84
  • These set screws are made from grade 8.8 steel.
  • They are fully threaded and conform to DIN 933 standards.
  • Zinc plated for increased resistance to corrosion.
  • Can be used with many nut types and washers.
£40.73 Ex Tax: £33.94
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£80.02 Ex Tax: £66.68
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£52.42 Ex Tax: £43.68
  • Set screws in a self colour finish.
  • Grade 8.8 high tensile.
  • The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.
£57.38 Ex Tax: £47.82
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£9.50 Ex Tax: £7.92
  • Socket caps have a small cylindrical head with tall vertical sides.
  • They have a drive which is a six-sided recess for use with a hex key.
  • Manufactured to DIN 912 standards.
  • Self colour finish.

Please note: socket caps are partially threaded, and no longer available with a full length thread.

£12.91 Ex Tax: £10.76