Quick Add To Cart


Enter Item Number:

x

Hand Tools, Power Tools & Hardware

Show:
Sort By:
  • Automatic gate latches will automatically latch when the gate is pulled to the closed position.
  • Ideal for gates in fields where easy access is preferred over security.
  • Also used widely for garden gates.
£0.00 Ex Tax: £0.00
  • Backflap hinges often used for bolting scenery to a base or stage floor.
  • Widely used in cabinet and garden furniture manufacture.
  • Zinc plated for a long lasting attractive finish.
£0.00 Ex Tax: £0.00
  • Forge black powder coated light pattern steel fixed pin butt hinges in traditional pattern.
£0.00 Ex Tax: £0.00
  • Forge polished chrome finished steel fixed pin butt hinges in traditional pattern.
£0.00 Ex Tax: £0.00
  • Forge light pattern steel fixed pin butt hinges in traditional pattern.
£0.00 Ex Tax: £0.00
  • Satin chrome finished steel fixed pin butt hinges in traditional pattern.
£0.00 Ex Tax: £0.00
  • Zinc plated steel fixed pin butt hinges in traditional pattern.
£0.00 Ex Tax: £0.00
  • This Forge traditional silent cabin hook is suitable for heavy-duty applications.
  • The tight fitting hook and eye prevents movement hence the silent application.
  • Made from solid brass and supplied with all fixings and fitting instructions.
£0.00 Ex Tax: £0.00
  • These strong wire cabin hook is ideal for securing or holding back doors or gates.

 

£0.00 Ex Tax: £0.00
  • Steel flush hinges do not require rebating into the door or frame surface and are ideal for lightweight doors or cabinet construction.
  • Also known as an easyfit hinge as there is no cutting of wood required for installation.

 

£0.00 Ex Tax: £0.00
  • These Forgefix TechFast Hex Head Roofing Screws are designed for fixing cladding and sheet steel to heavy section steel purlins of between 6.0mm and 12.5mm.
  • The screws have a hex head, are self-drilling and have a rubber washer which expands under pressure to form a permanent weather seal.
  • They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours.
£0.00 Ex Tax: £0.00
  • These Forgefix TechFast Hex Head Roofing Screws are designed for fixing cladding and sheet steel to light section steel purlins of between 1.2mm and 3.6mm.
  • The screws have a hex head, are self-drilling and have a rubber washer which expands under pressure to form a permanent weather seal.
  • They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours.
£0.00 Ex Tax: £0.00
  • These Forgefix TechFast Hex Head Screws are designed specifically for fixing cladding and sheet metal to timber frame work.
  • They have a Hex slash point head and are self-drilling for speedy insertion.
£0.00 Ex Tax: £0.00
  • These Forgefix TechFast Roofing Screws are designed for use in joining timber to steel and for light section purlins.
  • They have a Torx, countersunk head to sit flush to the surface.
  • The self-drilling point enables speedy insertion, and the wings create a clearance hole in the timber to eliminate the chance of 'jacking' when fixing.
£0.00 Ex Tax: £0.00
  • These Forgefix TechFast Roofing Screws are designed for use in joining timber to steel and for heavy section purlins.
  • They have a Torx, countersunk head to sit flush to the surface.
  • The self-drilling point enables speedy insertion, and the wings create a clearance hole in the timber to eliminate the chance of 'jacking' when fixing.
£0.00 Ex Tax: £0.00
  • Loose pin butt hinges for general purpose use on internal doors or cabinets.
  • Fitted with a removeable pin for easy door removal and refitting.
£0.00 Ex Tax: £0.00
  • Stormproof hinges, usually used in the construction of windows where the sash closes over the frame to prevent draft and water ingress.
  • Available in electro brass, epoxy black and zinc plated finishes.
£0.00 Ex Tax: £0.00
  • Tower bolts are used to secure doors or gates which are not needed to be locked.
  • Often used as secondary security on internal doors.
£0.00 Ex Tax: £0.00
  • Suffolk latches can be used for securing gates or doors where access is required from both sides.
  • The gate latches from the outward opening side and will latch when pulled closed.
£0.00 Ex Tax: £0.00
The Forge Gate Spring can be fitted to most garden gates or doors to ensure they swing back to th..
£2.51 Ex Tax: £2.09
  • These coach bolts are zinc plated, and ideal for timber to timber joining.
  • These have approx 35mm of thread on them.
  • Also known as 'cup square hex bolts', the square underneath the cup stops rotation of the bolt when tightening.
  • Conforms to DIN603 and DIN934 standards.
£0.00 Ex Tax: £0.00
The Ridgid 590L Dry Cut Saw produces clean, virtually burr-free cuts on steel, copper, aluminum a..
£0.00 Ex Tax: £0.00
The Irwin Blue Groove 6x drill bits are ideal for drilling wood and offer 6x faster drilling pene..
£0.00 Ex Tax: £0.00
The Moore & Wright 900 Series Internal Micrometers comprise of a measuring head, a set of ext..
£0.00 Ex Tax: £0.00
The Moore & Wright 966 Series Traditional External Micrometer has a blue textured frame finis..
£0.00 Ex Tax: £0.00
  • 100mm x 70mm x 25mm sanding sponge blocks.
  • A sanding block and paper in one.
  • Very flexible for all surfaces, can be used wet or dry and for fine finishing.
£0.00 Ex Tax: £0.00
  • Industrial quality wire wool.
  • Suitable for surface preparation
  • Made from high grade steel.
£0.00 Ex Tax: £0.00
  • These set screws are stainless for increased corrosion resistance.
  • Available in grades 304 (A2) and 316 (A4).
  • The head is designed to be driven by a hex key.
£0.00 Ex Tax: £0.00
  • These set screws are stainless for increased corrosion resistance.
  • Available in grades 304 (A2) and 316 (A4).
  • The head is designed to be driven by a hex key.
£0.00 Ex Tax: £0.00
  • These set screws are stainless for increased corrosion resistance.
  • Available in grades 304 (A2) and 316 (A4).
  • The head is designed to be driven by a hex key.
£0.00 Ex Tax: £0.00
  • These set screws are stainless for increased corrosion resistance.
  • Available in grades 304 (A2) and 316 (A4).
  • The head is designed to be driven by a hex key.
£0.00 Ex Tax: £0.00
  • These set screws are stainless for increased corrosion resistance.
  • Available in grades 304 (A2) and 316 (A4).
  • The head is designed to be driven by a hex key.
£0.00 Ex Tax: £0.00
  • These set screws are stainless for increased corrosion resistance.
  • Available in grades 304 (A2) and 316 (A4).
  • The head is designed to be driven by a hex key.
£0.00 Ex Tax: £0.00
  • These set screws are stainless for increased corrosion resistance.
  • Available in grades 304 (A2) and 316 (A4).
  • The head is designed to be driven by a hex key.
£0.00 Ex Tax: £0.00
  • These set screws are stainless for increased corrosion resistance.
  • Available in grades 304 (A2) and 316 (A4).
  • The head is designed to be driven by a hex key.
£0.00 Ex Tax: £0.00