Subscribe & Save

Sign up to special offers & discounts and receive 10% off your next order. Discount codes are usually received within 60 seconds.


* Email Address
First Name 
Subscribe
 
Subscribe & Save

Sign up to special offers & discounts and receive 10% off your next order. Discount codes are usually received within 60 seconds.


* Email Address
First Name 
Subscribe
 

Holemaker Technology

Show:
Sort By:
  • CarbideMax TCT Annular cutters are for the most extreme drilling depths through thick metal, box sections or stacked plate.
  • The CarbideMax 150mm Broach Cutter has precision drilling flutes and a specially engineered geometry for accurate cutting.
  • These cutters come with a standard 19.05mm Weldon shank for use in any magnet drill with sufficient stroke.
£0.00 Ex Tax: £0.00
  • These completely unique CarbideMax TCT Annular cutters are for the most extreme drilling depths through thick metal, box sections or stacked plate.
  • Ideal for drilling matching holes through box or H section in one single pass.
  • The CarbideMax 200mm Broach Cutterhas precision drilling flutes and a specially engineered geometry for accurate cutting.
  • These cutters come with a standard 19.05mm Weldon shank for use in any magnet drill with sufficent stroke.
£0.00 Ex Tax: £0.00
  • The CarbideMax 40 series will broach up to 35mm thickness of metal.
  • Up to 4x longer life and 15% faster cut than HSS cutters.
  • One of the hardest cutting tools, Tungsten Carbide is capable of drilling through the toughest steels.
£0.00 Ex Tax: £0.00
  • The CarbideMax 55 Series will broach up to 50mm thickness of metal.
  • Up to 4x longer life and 15% faster cut than HSS cutters.
  • One of the hardest materials used for cutting tools, Tungsten Carbide, is capable of drilling through the hardest steels.
  • HMT CarbideMax TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality carbide.
  • They are designed with an elaborate cutting geometry which results in faster, quieter, easier drilling and chatter free performance.
  • Furthermore, because the teeth of the cutter are doing all of the hard work, less strain is put on the wall of the cutter.
  • Therefore a thinner wall thickness is required meaning less material is removed resulting in a substantially faster cut.
£0.00 Ex Tax: £0.00
  • CarbideMax 55 TCT Rai Tungsten Carbide Broaching cutters are specially designed for drilling railtrack material.
  • Specially machined cutting geometry offers superior performance over against HSS cutters and other similar alternatives with in excess of 100 holes in UIC 60 Rail achievable.
  • The RailMax 55 Series will broach up to 50mm thickness of steel.
  • Suitable for Cembre, Rotabroach and other similar rail track drilling machines.
£0.00 Ex Tax: £0.00
  • The CarbideMax 55 Series will broach up to 75mm thickness of metal.
  • Up to 4x longer life and 15% faster cut than HSS cutters.
  • One of the hardest materials used for cutting tools, Tungsten Carbide, is capable of drilling through the hardest steels.
  • HMT CarbideMax TCT Broach cutters are tipped with individually brazed cutting teeth of the highest quality carbide.
  • They are designed with an elaborate cutting geometry which results in faster, quieter, easier drilling and chatter free performance.
  • Furthermore, because the teeth of the cutter are doing all of the hard work, less strain is put on the wall of the cutter.
  • Therefore a thinner wall thickness is required meaning less material is removed resulting in a substantially faster cut.
£0.00 Ex Tax: £0.00
  • CarbideMax 30 TCT Rail Tungsten Carbide Broaching cutters are specially designed for drilling railtrack material.
  • Specially machined cutting geometry offers superior performance over against HSS cutters and other similar alternatives with in excess of 100 holes in UIC 60 Rail achievable.
  • The RailMax 30 Series will broach up to 30mm thickness of steel.
  • Suitable for Cembre, Rotabroach and other similar rail track drilling machines.
£0.00 Ex Tax: £0.00
  • High quality 100mm extension arbor for improving access to deep drilling applications.
  • Extended pilot pin may be needed.
  • Can be mounted in series for extreme depth applications.
  • 35mm diameter.
£0.00 Ex Tax: £0.00
  • With the requirement for ultra large diameter broaching fast increasing, HMT have launched the CarbideMax-XL range of Tungsten Carbide Tipped cutters from 60mm right up to 200mm diameter with 110mm cutting depth as standard.
  • These high quality TCT cutters have a reinforced 32mm diameter shank to withstand the high levels of torque generated.
  • Large diameter broaching has its own unique challenges relating to correct machine size, RPM, lubricant and feed rates.
  • Hire machines for large diameter broaching available from stock.
£0.00 Ex Tax: £0.00
  • With the requirement for ultra large diameter broaching fast increasing, HMT have launched the CarbideMax-XL range of Tungsten Carbide Tipped cutters from 65 right up to 150mm diameter with 55mm cutting depth as standard.
  • These high quality TCT cutters have a reinforced 32mm diameter shank to withstand the high levels of torque generated.
  • Large diameter broaching has its own unique challenges relating to correct machine size, RPM, lubricant and feed rates.
  • Contact our sales team to discuss your particular application.
£0.00 Ex Tax: £0.00
  • With the requirement for ultra large diameter broaching fast increasing, HMT have launched the CarbideMax-XL range of Tungsten Carbide Tipped cutters from 65 right up to 150mm diameter with 55mm cutting depth as standard.
  • These high quality TCT cutters have a reinforced 32mm diameter shank to withstand the high levels of torque generated.
  • Large diameter broaching has its own unique challenges relating to correct machine size, RPM, lubricant and feed rates.
  • Contact our sales team to discuss your particular application.
£0.00 Ex Tax: £0.00
Handy 4pc Set Case containing 1 each Flame, Cylinder, Ball Nose, and Tree burrrs in 12mm head..
£136.44 Ex Tax: £113.70
  • Spare grub screws to suit virtually all standard magnet drill arbors, fittings and components.
£0.00 Ex Tax: £0.00
  • Spare grub screws to suit virtually all standard magnet drill arbors, fittings and components.
£6.23 Ex Tax: £5.19
  • Spare grub screws to suit virtually all standard magnet drill arbors, fittings and components.
£6.38 Ex Tax: £5.32
  • Spare grub screws to suit virtually all standard magnet drill arbors, fittings and components.
£3.88 Ex Tax: £3.23
  • Spare grub screws to suit virtually all standard magnet drill arbors, fittings and components.
£5.52 Ex Tax: £4.60
  • AeroPaste is an aerosol applied paste-type aerosol lubricant for hole broaching, tapping, reaming & drilling applications.
  • Ideal for overhead or positional application, the high viscosity of AeroPaste allows it to cling directly to the cutting tool or steel it is applied to, without fluid run-off.
  • A preferred lubricant for use in environmentally sensitive areas such as above water. Using AeroPaste minimises repainting or galvanising issues caused by conventional soluble lubricants and reduces mess and slipping hazards.
  • HMT Aerosol Lubricants have a 2 year shelf life. The production month and year can be seen printed on the bottom of the can.
£0.00 Ex Tax: £0.00
  • Water-soluble fluid supplied ready-for-use.
  • Inherently bio-degradable, can be 100% removed with water.
  • Synthetic based, chlorine free, with zero mineral oils.
  • No adverse affects for welding and galvanising.
£0.00 Ex Tax: £0.00
  • BioCut cutting paste is specifically formulated for superb performance when used with HMT Impact wrench cutting tools.
  • Extreme pressure concentration provides accurate hole lubrication.
  • Excellent general purpose paste lubricant when drilling, tapping, taps, countersinks, reamers and broach cutters.
  • Chlorine Free for safer use.
  • Suitable for use with all grades of steel including Stainless Steel & Aluminium.
  • Low Mess.
£0.00 Ex Tax: £0.00
  • The TCT MultiSink is a worldwide unique new Combination Countersink Tool designed and developed by HMT for use with magnetic drills, allowing the user to combine the tool with the VersaDrive product range to broach & countersink, drill & countersink, tap & countersink or even drill, tap & countersink in one operation - providing huge time-saving benefits.
  • The new Tungsten Carbide tipped version of this tool enables superior results on hard materials.
  • The countersunk hole will be centred by the VersaDrive tool it is piloted with, meaning that holes are accurately countersunk every time. As the MultiSink hole is self-piloted it will provide a smooth cutting action, preventing the chattering and reduced tool life commonly experienced with standard countersinks.
    £0.00 Ex Tax: £0.00
    • Fast, smooth drilling with miminal kickback; Specially hardened for impact wrench use.
    • Precision ground flutes with deep web design for easy chip clearance.
    • 135 degree SPLIT point angle for easy starting and high accuracy
    • 8% Cobalt for long life and endurance in structural steel and hard metals.
    • Goldmax low-friction titanium coating to stop heat burn-out.
    • High strength, non-slip shank design.
    £0.00 Ex Tax: £0.00
    • HMT Morse Taper Shank HSS Countersinks now come with the benefit of the special GoldMax coating for increased tool life, even when used without lubricant.
    • Standard 90 Degree Point Angle - 60 Degree available.
    £0.00 Ex Tax: £0.00
    • GoldMax TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life.
    • The HP2 Cut gives a smooth operation with short chips.
    • These burrs are recommended for use with high-speed die grinders or straight grinders.
    • Titanium Coating for long life and cooler cut.
    • All burrs are 100% braze tested for strength and safety.
    £0.00 Ex Tax: £0.00
    • GoldMax TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life.
    • All burrs are 100% braze tested for strength and safety.
    £0.00 Ex Tax: £0.00
    • GoldMax TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life.
    • The HP2 Cut gives a smooth operation with short chips.
    • These burrs are recommended for use with high-speed die grinders or straight grinders.
    • Titanium Coating for long life and cooler cut.
    • All burrs are 100% braze tested for strength and safety.
    £0.00 Ex Tax: £0.00
    • GoldMax TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life.
    • The HP2 Cut gives a smooth operation with short chips.
    • These burrs are recommended for use with high-speed die grinders or straight grinders.
    • Titanium Coating for long life and cooler cut.
    • All burrs are 100% braze tested for strength and safety.
    £0.00 Ex Tax: £0.00
    • GoldMax TCT Burrs are made to the highest specifications, giving metalworkers a precision cut, high control, and long life.
    • The HP2 Cut gives a smooth operation with short chips.
    • These burrs are recommended for use with high-speed die grinders or straight grinders.
    • Titanium Coating for long life and cooler cut.
    • All burrs are 100% braze tested for strength and safety.
    £0.00 Ex Tax: £0.00
    • The MultiSink is a worldwide unique new Combination Countersink Tool designed and developed by HMT for use with Magnetic Drills, allowing the user to combine the tool with the VersaDrive product range to Broach & Countersink, Drill & Countersink, Tap & Countersink or even Drill, Tap & Countersink in one operation - providing huge time-saving benefits.
    • The Countersunk hole will be centred by the VersaDrive Tool it is piloted with, meaning that holes are accurately countersunk every time.
    • As the MultiSink hole is self-piloted it will provide a smooth cutting action, preventing the chattering and reduced tool life commonly experienced with standard countersinks.
    • The MultiSink can also be used as dedicated Countersink only tool used with the pilot pin to ensure smooth hole running and exact accuracy every time.
    £0.00 Ex Tax: £0.00
    • The HMT ImpactaMag HSS reamer is a unique double-use reamer for enlarging and aligning holes in metals and hard materials; with a specially designed cutting geometry that is designed to allow the tool to be used in an Impact wrench or a Magnet drill.
    • When used in an Impact wrench it is secured into a special adapter meaning the tool is easier to control, apply correct feed rate, and withdraw from the finished hole, enhancing tool life.
    • This reamer will also fit into a standard weldon magnet drill arbor, providing a versatile 2 in 1 solution for circumstances where it may be more appropriate to use a magnet drill.
    • Ideal for steel erectors and bridge work. Used for Network Rail bridge refurbishment and strengthening.
    • Ideal for modifying and enlarging holes ready for the installation of TCB bolts and friction grip bolts.
    £0.00 Ex Tax: £0.00
    The HMT ImpactaMag HSS reamer is a unique double-use reamer for enlarging and aligning holes in meta..
    £383.18 Ex Tax: £319.32
    • The MAX100T is a robust and heavy duty unit, with virtually all the performance you will ever need in a magnetic drill.
    • It features an exceptionally powerful 2050W motor, advanced electronics and variable speed motor with reverse.
    • Suitable for broaching, up to M30 tapping, reaming and countersinking.
    • Each machine comes in a wheeled plastic site carrying case, moulded to protect the machine and accessories.
    • Free accessory pack contains: removable internal coolant system, bottle of broaching lubricant, safety pack with gloves, specs, ear plugs, removable metal guard, safety chain, 4 hex keys.
    • Use with VersaDrive Morse Taper 3 Arbor to quickly convert for use with all VersaDrive Tooling.
    £0.00 Ex Tax: £0.00
    • The HMT MAX200 is built for the largest broaching, drilling, and countersinking tasks.
    • This hugely powerful machine moves site engineering into a new category.
    • Morse Taper 4 Industrial 3.8kw motor with overload protection and variable speed
    • High precision slideway system for tooling accuracy
    • Twin folding handles and lifting eye for safe lifting
    £0.00 Ex Tax: £0.00
    • The new MAX40 magnet drill is a robust yet portable unit, with a powerful motor for constant single-speed structural broaching and drilling work.
    • Designed as a mid range unit where power and portability is needed, the MAX40 is optimised for fast broaching with CarbideMax TCT cutters in 40, 55, and 80mm lengths, and works superbly with the VersaDrive twist drill bits from 4.2 - 18mm.
    • Each machine comes in a plastic site carrying case,moulded to protect the machine and accessories. Free accessory pack contains: removable internal coolant system, sliding guard system, safety chain, handles, hex keys.
    • Powerful and stable broaching unit with twist drilling capacity, simple and robust for site or workshop use.
    £0.00 Ex Tax: £0.00
    • The MAX50T is a unit with exceptional characteristics, blending light weight portability with powerful capacity.
    • All day broaching capability up to 50mm diameter is combined with a forward reverse, variable speed motor that will tap holes up to M20 diameter.
    • Each machine comes in a robust plastic site carrying case with foam inserts to protect the machine and accessories.
    • Free accessory pack contains: removable internal coolant system, bottle of broaching lubricant, safety pack with gloves, specs, ear plugs, removable metal guard, safety chain, 4 hex keys.
    • Use with VersaDrive Morse Taper 2 Arbor to quickly convert for use with all VersaDrive Tooling.
    £0.00 Ex Tax: £0.00
    • The new HMT RTA40 is a low profile Magnet drill for tight access applications, being designed to fit into any space above 200mm.
    • Takes any standard broaching cutters while optimised to work with the high-performance CarbideMax 40 cutters.
    • The only tight access magnet drill in its class that will work with standard TCT annular broach cutters.
    • Rear mounted motor and switches for ease of access.
    • Ratchet drive can be mounted on either side of the machine.
    • Powerful motor and magnet gives excellent stability.
    • Each machine comes in a plastic case with hex keys, safety strap, ratchet, and removable coolant system
    £0.00 Ex Tax: £0.00
    • SpeedLube is a high-performance lubricant spray suitable for machine or hand-held drilling, tapping, broaching and countersinking cutting tool applications across a wide range of metals including stainless steel.
    • Aerosol propellant ensures the lubricant foams on contact to ensure maximum tool coverage and heat dissipation.
    • Easy one-handed provides fast, efficient lubricant coverage and minimises the number of applications required during the drilling process.
    • A unique 360 degree valve which enables SpeedLube to be sprayed from all angles.
    • HMT Aerosol Lubricants have a 2 year shelf life. The production month and year can be seen printed on the bottom of the can.
    £0.00 Ex Tax: £0.00
    • No electricity required for magnetic base.
    • Unique flexible features for pipes of various sizes.
    • Two separate magnets which allows the machine to swing away for hole inspection & debris removal without losing position.
    • No special attachments needed to accommodate flat or curved surfaces.
    • Highly stable wide stance.
    • Direct spindle drive.
    £0.00 Ex Tax: £0.00
    • Use with VersaDrive Morse Taper 3 Arbor to quickly convert for use with all VersaDrive Tooling.
    • Suitable for use on pipe 75mm diameter and larger.
    • Performs equally well drilling on flat surfaces.
    • No electricity required for magnetic base.
    • Unique flexible features for pipes of various sizes.
    • Two separate magnets which allows the machine to swing away for hole.
    • Inspection & debris removal without losing position.
    • No special attachments needed to accommodate flat or curved surfaces.
    • Highly stable wide stance.
    • Direct spindle drive
      £0.00 Ex Tax: £0.00
      • Patented Drill Point - 50% Faster Drilling with 30% less presure.
      • Incredible Finished Hole quality.
      • Instant drill start with no slipping.
      • No snatch when drill bit breaks through.
      • Fantastic Tool Life.
      • Fully Impact Rated on structural steel
      £0.00 Ex Tax: £0.00