CS-90 is very high temperature resisting copper grease with a graphite additive, ideal for all automotive, industrial and construction uses. Using CS-90 prevents corrosion fretting or galling. CS-90 is enhanced with graphite for added lubrication to allow easy dismantling of threaded fasteners and tight joints. CS-90 will penetrate into chains, wire ropes, hinges, locks, brake callipers and bearings. CS-90 is lead free and water resistant. CS-90 is rated to 1200 degree C will provide a guard against high temperature seizing and is ideal for use in extreme pressure locations that are subject to high temperature. Application to steel surfaces prior to assembly will ensure easy parting and release even after long periods. Boiler parts and manifolds are typical areas of use.
Use CS-90 on screw threads or threads where metal to metal surfaces make contact, CS-90 will reduce friction. CS-90 remains effective over long periods of time where there are long periods in idle and minimum movement. Nuts, studs and bolts can be easily removed when treated at time of assembly. The extra fine copper particles in CS-90 act as a barrier to corrosion even in the harshest conditions as the copper particles remain in the threads to prevent seizing. The graphite flakes aid the high temperature capability. CS-90 can be removed with white spirit or normal de-greasing methods if required. CS-90 can be used on copper, brass, cast iron, steel and stainless steel. CS-90 can be used on non metallic gaskets. Available in aerosol or non aerosol compound tub.